What does it mean when my Chevy Cruze says service tire monitor system?

A Chevy “service tire monitor system” warning can mean one of two things. The first is that your tire pressure is suboptimal and requires adjusting to manufacturer-recommended levels. The second meaning applies if the warning does not go away after filling the tires or if a flashing TPMS light accompanies it.

What does it mean when the service tire monitor system?

The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.

RELATED READING  Do you need chains on all 4 tires with AWD?

How do you reset the tire pressure sensor on a 2011 Chevy Cruze?

Use the MENU button to select the Vehicle Information Menu in the DIC. Use the thumbwheel to scroll to the Tire Pressure Menu Item screen. Press the SET/CLR button to begin the sensor matching process. Press the SET/CLR button again to confirm.

How do you fix a tire monitoring system?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and let it run for 20 minutes, which allows the sensors to reset. You’ll find the tire pressure monitor reset button located beneath the steering wheel.

What does it mean when my Chevy Cruze says service tire monitor system? – Related Questions

How much does it cost to fix a tire pressure monitoring system?

How much does it cost to replace a TPMS sensor? In the event TPMS sensors need to be replaced, the cost can range from approximately $50-$100 each depending on vehicle type.

How much does it cost to fix a tire sensor?

On average, you will have to spend between $30 to $75 for a sensor and around $10 to $35 in labor costs. Thus, the average cost of replacing a tire sensor can cost between $40 and $100.

How much does it cost to service tire monitor system?

You can expect to pay between $50 and $100, which includes the labor cost. It depends on whether or not they can change the TPMS sensor without taking the whole wheel off. Most cars don’t let you do this, but if you have one that lets you change the TPMS sensors without taking the tire off, you’ll probably pay less.

RELATED READING  Can you put a different size tire on a different size rim?

Why is my tire pressure monitoring system not working?

If you are unable to read the sensor, you may need to update your TPMS tool. The latest TPMS software will include the latest vehicle and TPMS sensor coverage, so be sure to perform a TPMS update. Check your tool under the SETTINGS menu for the latest software update and compare it to the latest update notes online.

Where is the tire monitor reset button?

The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.

How do I know if my TPMS is bad?

Signs You Might Need To Replace Your TPMS Sensor
  1. Dead Batteries. The TPMS sensors require batteries that last around five years, depending on how often you drive your vehicle.
  2. Alerts Must Be Wrong.
  3. Increased Fuel Consumption.
  4. Handling Concerns.
  5. Shoddy Tire Change.

Is there a fuse that controls the tire pressure sensor?

TPMS FUSE NUMBER ? The tire pressure warning system fuse is located in the fuse box located under the dash, just to the left of the steering column. The fuse box in question should have 33 fuse slots, although not all will be in

Can I drive with a broken TPMS sensor?

If you don’t replace your faulty tire pressure sensor, you run the risk of driving over something and puncturing your tire. If this happens, it may be difficult to tell that you have a flat because the low air pressure warning should have already been triggered but is not being displayed on your dashboard.

RELATED READING  Can curb rash be repaired?

How do you fix a TPMS sensor without replacing it?

Is it OK to drive without a tire pressure sensor?

Basically there is no problem in running tires without the tire pressure sensors other than, as you point out, the warning light showing at all times.

Do you have to replace all 4 tire pressure sensors?

If a single sensor has reached the end of its lifespan, it is highly recommended to replace all sensors at the same time. Similar to headlights, once one sensor dies, the rest are likely to be close behind. The same is true for a corroded valve stem or other non-impact sensor replacement.

Why is my tire pressure light on when my tires are fine?

If the light keeps on for long periods of time, it’s most likely due to a small issue (a tire pressure sensor reset is required) or that you’ll have to bring it into the shop for repairs (one or more sensors may need replacing).

How much does it cost to replace 4 TPMS sensors?

The average cost for TPMS sensor replacement is between $210 and $254. Labor costs are estimated between $55 and $69 while parts are priced between $155 and $185. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

Can a tire shop replace TPMS?

Sometimes, a TPMS alert means one or more of the TPMS sensor batteries has died. In this situation, you may need to replace the TPMS sensor. All of our store locations can perform these replacement services for you.

Leave a Comment