What does the VSC Light mean? The Check VSC System Warning or VSC light indicates that there is a problem with your traction control system, and your VSC and ABS systems will be temporarily disabled. It may also appear if you accidentally pressed the VSC button.
Simply push and release the VSC Off button located near your gear shift, and your TRAC will be turned off. Look for the TRAC OFF indicator light near your speedometer. Your VSC Off indicator light will be here as well. When you want to turn the TRAC back on, just push the button again.
If you’re seeing the VSC light turning on, that’s your Toyota’s Vehicle Stability Control program kicking in. It’s a stability control system that works to ensure that your car is able to maintain traction in any condition.
Why did my check engine light and my traction control light come on and my VSC light is flashing?
It will flash if the fault is likely to cause damage to the catalytic converter. The VSC light is for the Vehicle Stability Control system and it is probably indicating that whatever fault exists, is common to the two systems. In other words, you will probably be able to solve both lights with one repair.
What does it mean when the VSC light comes on? – Related Questions
Can I drive my car with VSC light on?
It is safe to drive your Toyota while the VSC OFF light is on, however, we recommend cautious driving, especially in poor weather.
Why would my check engine light and traction control light come on at the same time?
Therefore, if you see your engine light flashing and your traction control light is on at the same time, the most common causes are related to a faulty traction control system and its malfunction due to road conditions.
Why did my traction control and check engine light come on Toyota?
This light comes on when the computer has detected that something may be malfunctioning in the traction control system. The traction control system monitors the steering and stability of the vehicle and engages when loss of traction has been detected.
What does service stabilitrak mean and check engine light?
Recommended Services
The recommended service is a check engine light diagnostic. Once the faults causing the check engine light to illuminate are fixed, if the Stabilitrak warning light remains illuminated, that system has to be diagnosed. Stabilitrak is an electronic and sensor based stability control system.
Why does my traction control keep flashing?
A flickering light could also mean that the system is not fully operational, so use extra caution in adverse road conditions. Many traction control systems will illuminate the warning light when the system detects a loss of traction, like in snowy or rainy weather.
How do I fix service stabilitrak warning?
First of all, press the traction control system (TCS) button on your car’s steering wheel; then, rerelease it. After that, press and hold on to the control button for a few seconds; then, the service StabiliTrak light will turn off.
Can I drive my car if it says service StabiliTrak?
You are absolutely fine to drive the vehicle. Just know these devices to help control the vehicle in a sliding situation are off, and you will need to drive accordingly if in certain conditions. The best option is to have a technician look at the system.
Does StabiliTrak affect transmission?
Vehicles with StabiliTrak can experience hard shifting or a hesitating transmission. You may feel the vehicle jerking between gears or slipping when changing gears. Over time, this can cause serious wear and tear on the transmission and could cost you thousands of dollars to repair.
When an input sensor is faulty, it causes Service StabiliTrak warning alerts to appear on the dashboard. It can be due to wheel speed, rate of turn, or steering angle. You should replace these sensors as soon as possible by local technicians, so these errors don’t escalate into worse situations.
How much does it cost to fix StabiliTrak?
How Much Do Stabilitrak Repairs Cost? Despite being such a complicated system, Stabilitrak repairs are surprisingly affordable. A typical Stabilitrak repair costs between $80-$200. That’s not bad for a car repair, especially considering how complex these systems can be.
How do I reset my traction control stability?
Put your car in park. Press and hold the VSC button for 5 seconds and the TRAC OFF and VSC OFF lights should both come on. Press the VSC button one more time and your traction control system will reset.
Why is my service traction control and StabiliTrak light on?
What Does The Service StabiliTrak Message Mean? If something is wrong with your vehicle’s Electronic Brake Control Module, the Service StabiliTrak Light will appear. The Service StabiliTrak message will appear if something is wrong with your vehicle’s StabiliTrak System and the system is disabled.
Where is the traction control sensor located?
In some vehicles it is located under the hood and/or is a part of the ABS control module. Other vehicles may have the traction control module located in the interior or trunk areas.
How do I reset my ABS and traction control light?
What do you do when your car says service traction control?
If the TCS and the ABS warning lights both come on, along with the red main brake warning light, you should not drive the car until the problem has been fixed. Your entire braking system is affected, and may not be able to stop your vehicle when you need it to. Have your vehicle towed to a repair shop.
Can bad brakes cause traction light to come on?
ABS Module Failure
Or a brake system malfunction, say an unresponsive brake pedal, may have caused the Traction Control Light to come on. It is bound to happen since the ABS and Traction Control systems share the same control module and vehicle components.