R stands for “Radial” and the last two digits 16 indicate the size of the diameter of the rim measured in inches. The measurement ends with the load index 123 or maximum weight that each wheel can bear and the speed index R or the maximum speed for which the tire has been approved.
What does 123 120r mean on a tire?
Service description: 123/120 R 123. Load index – single wheel fitment. 120. Load index – dual wheel fitment. R.
What does 126 123R mean on tires?
The load index of this tire is “126” – 3,748 lbs for a single-wheel rear axle, and “123” – 3,417 lbs for a dual rear wheel application.
What does 121R mean on a tire?
The 121R sequence tells us the tire’s maximum load rating or the amount of weight the tire can bear (in kilograms; in this case 121), and the R gives us the speed rating, or how fast the tire can safely rotate. The lowest rating (speed) that you’d usually see on a passenger car is Q, which is equivalent to 99 mph.
What is 123R on a tire? – Related Questions
What does R and R tire mean?
R indicates the construction used within the tires casing. R stands for radial construction. B means belted bias and D stands for diagonal bias construction. 17 The last dimension listed in the size is the diameter of the wheel rim, which is most often measured in inches. LOAD INDEX AND SPEED RATING.
Does the R matter in tire size?
The speed rating is the letter that follows the load rating, but you may also see it following the “R” on some tires. This indicates the maximum speed the manufacturer designed the tire to handle.
What does 121 118r mean on a tire?
R – Designates the tire has radial construction. 17 – Wheel Diameter. 121/118 – Load Index. S – Speed Rating.
What is 121 118 load range?
Higher load index ratings mean your tires will be able to handle a heavier load. In this example, there are two numbers. The higher number (load index) is for single rear-wheel applications. The lower number is for dual-wheel applications.
Load Index.
LOAD INDEX |
LOAD (lbs) |
118 |
2910 |
119 |
2998 |
120 |
3086 |
121 |
3197 |
What is a 121R car battery?
The Duracell Automotive Battery, Group Size 121R is a 12-volt battery, which is standard among car batteries. Other notable traits are its 675 cranking amps at 32 degrees Fahrenheit, and its cold-cranking amps of 550 at 0 degrees Fahrenheit. It is also built with a right positive and a reserve capacity of 80.
What does a load index of 120 mean in tires?
Light Truck Tire Load Index
For example, a light truck tire with a load index of 120/116 means a load capacity for a single tire of 3,086 pounds and a load capacity of 2,756 pounds for two tires.
What is a 123 load index?
Tire Load Index Chart
Load Index |
Load (lbs) |
123 |
3417 |
124 |
3527 |
125 |
3638 |
126 |
3748 |
What does load range 125 mean?
Load and Speed Ratings- 125/122 seen in the above tire sidewall refers to the load rating of the tire. 125 denotes that each tire can carry 3638 pounds at the maximum inflation pressure.
What is a 125 load index?
As It Pertains to GVWR
And because a load index of 125 means that each tire can carry 3,638 pounds apiece (14,552 pounds in total), the truck is more than capable of operating at its 10,000-pound GVWR safely.
What does 121 load index mean?
Tire Load Index Capacity
The rating of 121 shows that it has a load capacity of 3297LBS. Multiply that by four tires (4 x 3,297 = 13,188 pounds) to get your vehicle’s max load carrying capacity. Always remember to install tires that have a load index that is equal or greater than your original factory-installed tires.
What is a good tire load index?
The higher the tire’s load index number, the greater its load carrying capacity. Choosing a tire with a lower load index than the original equipment specifications means that the tire will not carry the load capacity of the original. Most passenger-car tire load indexes range from 75 to 100, but some are higher.
Is a higher load index better?
If you’re thinking about up-sizing, you can switch to a tire with a higher load index, because that means your tire can safely carry more weight, but you can never go down.
Will a higher load index tire last longer?
Why Is Tire Load Index Important? The tire load index tells you how much weight your tire can carry, and overloading your tires is never a good idea! When you put too much weight on your tires, you can cause damage and wear them down prematurely. Even worse, you run the risk of experiencing a tire blowout.
What load range tire do I need for my truck?
To roughly determine the tire load range capacity for each individual truck tire, take the vehicle’s gross vehicle weight (or GVW) and divide by four. If the vehicle gross weight is 4,500 pounds, each tire should be able to safely support at least 1,125 pounds.
Is it OK to use higher load index tire?
It’s absolutely crucial to the safety of your driving experience that you select a tyre with an appropriate load rating for your vehicle’s needs. If in any doubt at all, always go for a higher load rating than you need, as this won’t cause any harm to your vehicle.
Is higher tire pressure better for performance?
Larger tires and higher inflation pressures provide more load capacity, while smaller tires and lower tire pressures provide less. Correctly inflated tires receive appropriate support from the contained air pressure to provide an even distribution of load across the footprint and help stabilize the tire’s structure.