Passive Anti-Theft Systems (PATS), also called Ford Securilock, is a vehicle security feature introduced on 1996 and later Ford vehicles. When replacing the Powertrain Control Module (PCM) on a PATS-equipped vehicle, a parameter reset or relearn procedure must be performed after the PCM is installed.
Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
Do this again, but turn the key in the opposite direction.
Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
Can a PATS system be bypassed?
From what we found, it is possible to bypass your car’s PATS system, although doing this usually means Ford will have to reprogram your keys. What is this? You can also try attaching one of your PATS keys inside your steering column, which will allow you to bypass it for everyday driving.
The system arms when you lock your vehicle. When armed, the alarm is triggered in any of the following ways: If someone opens a door, the liftgate or the hood without a valid key or remote control.If you switch your vehicle on without a correctly coded key.
What is a Ford Pats system? – Related Questions
Why did my car go into anti-theft mode?
If your vehicle has been damaged, during an attempted break-in or theft or otherwise, the anti-theft system might have been triggered. Check to see if the lock cylinder is damaged, and also check underneath the door handle – thieves have been known to use screwdrivers in an attempt to jimmy the door open.
Does anti-theft mode stop car from starting?
What should I do when the anti theft system wont let my car start? It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly.
What is Ford theft mode?
What Is Ford SecuriLock® Passive Anti-Theft System (PATS)? SecuriLock is an engine immobilization system. It helps to prevent anyone from starting the engine without using a coded key programmed to your vehicle. Using the wrong key could prevent the engine from starting.
Why does my anti-theft system keep going off?
Some of the reasons your car alarm keeps going off include faulty sensors, low battery, wiring problems, and a broken key fob. It could also be from unevenly closed doors.
Turn the key to unlock your car door, but don’t release it.Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
Is there a fuse for anti-theft system?
Locate the fuse box containing the alarm fuse. It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box.
How much does it cost to fix my anti-theft system?
The Best in Auto Repair
The average cost for antitheft system control module replacement is between $419 and $447. Labor costs are estimated between $104 and $132 while parts are priced at $315. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
Where is the anti lock fuse?
The fuse box for the ABS is located in the engine compartment on the passenger’s side. To open it, push the tab as shown. 253 to 256, or the diagram on the fuse box lid, which fuse or fuses control that component. Check those fuses first, but check all the fuses before deciding that a blown fuse is not the cause.
Can I remove a fuse to prevent theft?
Unfortunately, simply unplugging a fuse isn’t going to stop a determined thief, as they often tow cars away rather than going to the noise and effort of trying to start them
Sadly not. It can make theft more difficult but thieves are using high-powered cutting tools to remove catalytic converters and because of this it is not possible to make catalytic converters ‘unstealable’. A Catloc makes it harder to steal a catalytic converter, slowing thieves down and acting as a deterrent.
What happens if I remove alarm fuse in my car?
Remove The Alarm’s Fuse
Fuses send electricity to different parts of your car, so removing the alarm’s fuse won’t stop power from the overall battery connected to your engine (remember, car alarms need to run when the engine is off, so they have a distinct fuse).
How do I permanently turn off my factory car alarm?
There are simple instructions if you want to know how to disable a car alarm permanently. You should just unlock the door, start the car, remove the fuse, or disconnect the battery of the car.
Will disconnecting battery reset car alarm?
If you’re still having trouble with the alarm, disconnecting your car’s battery may be the next best option. This will both silence the alarm and reset it—or at least it should. You may also want to refer to your owner’s manual for the location of the alarm’s transmitter system.
How long does it take for the anti-theft system to reset?
Leave the key there for 15 minutes; it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up. Turn the key backward two places to the Lock position, then wait three more minutes.
Can my anti-theft system drain battery?
Some Security Systems for Cars Will Drain the Battery
The wiring to the alarm on these systems goes directly to the battery, and they will slowly take away energy from the battery. Eventually, this can lead to the failure of the battery. It generally happens later in the life of a battery.