A lift gate helps lift heavy objects up to the opening – or gate – of a trailer. Think of it as a mini freight elevator attached to a truck. A semi-truck or van fitted with a lift gate will have a steel base attached to the back side of its trailer, near the bumper.
Lift gates can range in size. They can go from 80” wide to 89” wide and 30” deep to 70” deep. We have never seen an LTL carrier not have a lift gate that is at least deep enough to handle a standard 40” x 48” pallet. The width of the lift gate is dependent on the type of truck.
How much can a liftgate lift?
Most liftgates can handle freight that is equal to or less than 96 inches wide, and 48 inches deep. This means that standard-sized pallets can easily be used with a liftgate. The weight limit on a standard liftgate is 2500 lbs.
A tuck-under lift gate is meant to stay out of your way until you need to engage it. As the name implies, a tuck-under lift gate tucks right under and away from the cargo entrance, allowing for you to back up vehicles to loading docks without a lift gate getting in the way.
What is a lift gate on a truck? – Related Questions
Can you drive with the lift gate up?
Note: Do not leave the liftgate open when you are driving. This could damage the liftgate and its components.
How much weight can a tuck under lift gate hold?
They’re designed with a payload capacity of up to 10,000 lbs., tuck-under lift gate and are dock height with reinforced body helping your operation run smoothly. Let’s get to work.
What are the different types of lift gates?
4 Liftgate Options for Your Box Truck
Conventional. The conventional liftgate is the most common type of liftgate and rests in an upright position when not engaged, up against the door of the truck body.
Tuck-away/Tuck-Under.
Cantilever.
Rail Gate.
What does lift gate needed mean?
What Does Liftgate at Delivery Mean. When a shipment has been specified as requiring a liftgate at delivery, it generally means that the consignee (party receiving the shipment) does not have a shipping dock or a forklift to unload the freight.
How do you let a lift gate down?
How does a lift gate work?
How much is a lift gate charge?
A liftgate fee is charged when loading or unloading is done using a truck’s lift gate, also commonly known as tail lift. The liftgate fee is usually about $100 to $250, depending on the carrier, truck type and amount of cargo being loaded or unloaded.
Almost all vehicles with rear doors or cargo areas that move like a hinge can have an aftermarket power liftgate installed. However, if you are looking into buying a brand new vehicle with a power liftgate system, it can cost between $2,000 to $9,000.
Do I need a lift gate?
Generally, if the shipping load weighs more than 150 pounds and you don’t have the important equipment to carry the loading and unloading process, you will need lift gate services.
Do you need a lift gate if you have a loading dock?
Lift gates are usually not needed by companies that have a forklift or shipping dock available. With shipping docks, trucks can be backed up to the platform and unloaded since it does not need to be adjusted to the ground first.
Do I need a liftgate on my box truck?
They allow for safe and efficient loading and unloading of heavy cargo. A crucial factor in a truck’s functionality, a liftgate is one of the most essential additional investments you could make for your truck. They increase productivity and reduce the manpower needed for loading and unloading.