Blame engine vibration and chintzy bonding on the core-to-tank ends of 6.4L Ford Power Stroke engine’s radiator tanks (which are plastic) for causing cracks that lead to coolant leaks. This concern plagues nearly all of these powerplants. The problem ultimately can promote severe engine damage from overheating.
How do you prime a fuel filter on a 6.4 Powerstroke?
How often should you change fuel filter on 6.4 Powerstroke?
Oil and Filter – Oil change service intervals should be completed as indicated by the instrument cluster message center or every 7,500 miles. Fuel Filter Change – Change every 3rd oil change or every 15000 miles(24,140 km) or as indicated by the message center which ever comes first.
What is biggest problems with 6.4 Powerstroke? – Related Questions
What is the best oil for 6.4 Powerstroke?
If you live in a warm environment, sticking with 15W-40 oil is the best option for your 6.4L Powerstroke. Colder environments may require substituting 10W-30 instead.
How much horsepower does 6.4 Powerstroke have?
How Much Horsepower and Torque does a 6.4L Powerstroke have? The 6.4L Powerstroke Diesel engine found in 2008-2010 Ford Superduty trucks produces 350 horsepower at 3,000 rpm and 650 of torque lb-ft at 2,000 rpm. Power can easily be increased with tuning or other mods.
How often should I change my fuel filter on my powerstroke?
6.7L Diesel Suggested Maintenance. Oil and Filter – Oil change service intervals should be completed as indicated by the instrument cluster message center or every 7,500 miles. Fuel Filter Change – Change every 3rd oil change or every 15000 miles(24,140 km) or as indicated by the message center which ever comes first.
How often should I change the fuel filter on my diesel truck?
Diesel fuel is by nature, quite dirty, so it makes sense that the fuel filter is one of the most important filters on any diesel application. They usually require a change every 10,000 to 15,000 miles whereas a modern gasoline fuel filter could go 100K+ miles before a change is needed – if at all.
How many fuel filters does a 6.4 Powerstroke have?
Ordered three of these Fuel filter packages and each box came with only one filter, there’s should have been two cartages per box as each 6.4 has two separate fuel filters. one mounted by frame under drivers side (water Separator) and one on top of the motor.
Ford diesel engines can last over 500,000 miles before they require an overhaul. Conversely, Ford gas engines will likely need a rebuild after reaching 200,000 miles.
Is a fully deleted 6.4 Power Stroke reliable?
Both the DOC and DPF equipment sit within the exhaust system whereas EGR sits within the engine. Deleting the DPF also removes the DOC. The DPF on the 6.4 Powerstroke is prone to clogging and causing reliability issues. Additionally, it creates exhaust backpressure which is bad for performance.
How do you bulletproof a 6.4 Power Stroke?
A Powerstroke 6.4L engine can be stated bulletproof only if it has covered at least four of five core problems.
Change the parts
EGR cooler.
Oil cooler.
Head studs.
Fuel injection control module.
Water pump.
Is the Power Stroke 6.4 a good engine?
Though, the 6.4 Powerstroke also suffers from a few unrelated issues like radiators, pistons cracking, HPFP wire chafing, etc. That said, we’ll give the 6.4 Power Stroke average remarks for reliability. It’s certainly not as reliable as some of the older legends like the 7.3 Power Stroke or 5.9 Cummins.
Is 6.4 or 6.7 Power Stroke better?
Cast from compacted graphite iron by Tupy, the 6.7L Power Stroke’s deep-skirt block reduces both weight and NVH over the 6.4L’s cast-iron crankcase yet is considerably stronger.
How much does it cost to rebuild a 6.4 Power Stroke?
6.4 Powerstroke is the most expensive Ford truck to rebuild. 10-13K easy for the parts, especially if you throw some upgrades in it as well. 6.4 Powerstroke is the most expensive Ford truck to rebuild. 10-13K easy for the parts, especially if you throw some upgrades in it as well.