The J20D specification is the cold-temperature equivalent to J20C.
What is John Deere Hy-Gard equivalent to?
Low-Viscosity Hy-Gard replaces the John Deere All-Weather Hydrostatic Fluid and should be used as a direct replacement for all applications recommending hydrostatic fluid. Low-Viscosity Hy-Gard is compatible with hydrostatic fluid and can be added to systems, which contain hydrostatic fluid.
What can I use in place of hydrostatic fluid?
There’s no question that motor oil will work in mower hydrostatic transmissions that allow its use.
What is the difference between J20A and J20C?
Petro-Canada Lubricants notes that the key difference between JDM J20A (which is replaced by the current JDM J20C or JDM 20D specification) is the addition of the Alli- son C-4 seal, oxidation, wear and frictional characteristics test requirements — a fact that is not commonly known.
What is equivalent to J20C? – Related Questions
Can I mix J20C and j20d?
John Deere machine owners should not mix transmission oil types to create an all-season lubrication. Mixing the oils may result in costly damage to the transmission in extreme hot or cold weather.
What weight is J20C hydraulic fluid?
What is John Deere J20C?
49 NORTH® TRACTOR HYDRAULIC FLUID (J20C) is a multifunctional type fluid formulated specifically for tractors using a centralized system to lubricate the transmission, differential, wet brake, power steering, and hydraulic systems. QUALITIES.
What weight is j20a hydraulic fluid?
Additional information
| Weight |
624 oz |
| Dimensions |
12 × 15.5 × 12 in |
| Size |
5 Gallon Pail, 16 Gallon Pail, 55 Gallon Drum |
Is hydraulic oil and gear oil the same?
The difference between Gear Oil and Hydraulic Oil is that Gear oil is comparatively shows high viscous nature compared to hydraulic oil and in turn Gear oil is thicker than hydraulic oil. Gear oil is used in cars and acts as a lubricant whereas hydraulic oil helps in moving the water powered apparatus and hardware.
What kind of hydraulic fluid does a John Deere take?
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.
What happens if you use the wrong hydraulic fluid?
Using the Wrong Hydraulic Oil
Failure to use the correct proper oil will not only decrease the efficiency and performance of the hydraulic system, but it can also seriously shorten the life of the system and the many components that comprise it.
Can you use engine oil for hydraulic oil?
Engine oil can work satisfactorily as a hydraulic fluid. However, if a multigrade engine oil is being used in the hydraulic system specifically for its high viscosity index (VI), then it’s not the correct solution. The reason is the additives used to improve viscosity index.
Are all tractor hydraulic fluids the same?
Different tractor manufacturers have different specifications for the trans-hydraulic fluids that should be used in their equipment. You should always use a trans-hydraulic fluid that says on the label that it meets the specifications of your tractor’s maker.
Can you mix different brands of hydraulic fluid?
CAN I MIX HYDRAULIC FLUIDS? As far as possible, it is always best to avoid mixing different hydraulic fluids. This is because the technical properties could be spoiled by chemical reactions between different additives.
Can I use hydraulic oil instead of hydraulic fluid?
The key difference between hydraulic fluid and hydraulic oil is that hydraulic fluid is used in automatic transmissions in automobile systems whereas hydraulic oil can not be used for this purpose. Hydraulic oil is the most common form of hydraulic fluids.