Low-Viscosity Hy-Gard replaces the John Deere All-Weather Hydrostatic Fluid and should be used as a direct replacement for all applications recommending hydrostatic fluid. Low-Viscosity Hy-Gard is compatible with hydrostatic fluid and can be added to systems, which contain hydrostatic fluid.
What weight oil is Hy-Gard?
Hy-Gard oil can be used in most applications calling for 10W-30 or 5W-30 engine oil for transmission and hydraulic oils.
What can I use in place of hydrostatic fluid?
There’s no question that motor oil will work in mower hydrostatic transmissions that allow its use.
What kind of oil goes in a John Deere hydrostatic transmission?
John Deere suggests hydraulic fluid meeting the John Deere “J20C” specification or 10W-30 motor oil. The AMSOIL products that meets this spec are AMSOIL Synthetic Tractor Hydraulic/Transmission Oil or AMSOIL Small Engine Synthetic 10W-30 Motor Oil.
What is John Deere Hy-Gard equivalent to? – Related Questions
Can I use 20w50 in a hydrostatic transmission?
For use in hydrostatic transmissions in zero turn, stand on and riding mowers requiring a high viscosity transmission fluid, either 20W-50 or 15W-50.
Is hydrostatic oil the same as hydraulic oil?
Hydrostatic Fluid is an exceptional quality hydrostatic and anti-wear ISO 46 multi-viscosity hydraulic oil containing additional additives to prevent wear. It is designed to exceed the performance requirements of many major hydrostatic and hydraulic pump manufacturers.
What kind of fluid goes in a hydrostatic lawn mower transmission?
The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.
What kind of transmission fluid goes in a John Deere riding mower?
John Deere Low Viscosity Hy-Gard Transmission and Hydraulic Oil – An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
Is J20C and J20D the same?
The J20D specification is the cold-temperature equivalent to J20C.
How much oil does a John Deere z930m take?
How often should a John Deere mower be serviced?
Every lawn tractor and riding lawn mower needs a tune-up at least once a year. It’s an easy task that’ll take you 30 minutes or less. To make things even easier, TriGreen Equipment has Home Maintenance Kits for every model of John Deere Zero-Turn Mower, riding lawn mower, and lawn tractor.
When should I change my John Deere oil?
Replace after every 500 hours or annually. (Interval can vary according to operating conditions.) Initial oil and filter change at 100 hours and then after every 250 hours. Scheduled interval of 250 hours can be extended to 375 hours if John Deere Plus-50 oil and John Deere filter are used.
What kind of gas does a John Deere Z930M take?
Buy Online
| Key Specs: |
|
| Air cleaner |
Pre-cleaner Yes Heavy-duty canister type with safety element |
| Fuel system: |
|
| Fuel type |
Gasoline |
| Fuel consumption |
Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr |
Can you use non ethanol gas in a John Deere lawn mower?
John Deere recommends fuels with 10 percent ethanol or less. If you’re using methyl tertiary butyl ether — MTBE — reformulated gasoline, make sure there is 15 percent or less MTBE in the fuel.
Should I use ethanol free gas in my lawn mower?
However, when you’re using gas with ethanol mixture in your outdoor power equipment, like lawn mowers, chainsaws, trimmers and leaf blowers, you run the risk of engine damage and incurring costly repairs. You should be using ethanol free gas in your small engine outdoor power equipment.