Low-Viscosity Hy-Gard replaces the John Deere All-Weather Hydrostatic Fluid and should be used as a direct replacement for all applications recommending hydrostatic fluid. Low-Viscosity Hy-Gard is compatible with hydrostatic fluid and can be added to systems, which contain hydrostatic fluid.
What is equivalent to JDM J20C?
The J20D specification is the cold-temperature equivalent to J20C.
What weight oil is JD Hy-Gard?
Hy-Gard oil can be used in most applications calling for 10W-30 or 5W-30 engine oil for transmission and hydraulic oils.
What hydraulic fluid does John Deere use?
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.
What is John Deere Hy-Gard equivalent to? – Related Questions
What company makes John Deere oil?
Usually, Chevron formulates and packages the specialty engine oils for John Deere. Besides, other top brands like Mobil, Shell, or Exxon can be the manufacturer of John Deere specialty engine oils for a particular year based on who won the final lowest bidding opportunity.
Is transmission oil the same as hydraulic oil?
Transmission oil is a type of hydraulic oil! It a medium that transmits power from the engine to the transmission. Meanwhile, other types of hydraulic fluid includes multigrade engine oil, conventional and antiwear hydraulic oil.
How often should you change hydraulic oil in a John Deere tractor?
Change after first 100 hours, then after every 200 hours, if tractor is not equipped with hydraulic filter, or else if tractor is not equipped with hydraulic filter then change after 600 hours. Service after 200 hours or annually, whichever comes first. Service as required.
What hydraulic fluid does a John Deere 333g take?
CASTROL VECTON LONG DRAIN 15W-40 CK-4/E9 best. Castrol VECTON Long Drain with System Pro Technology™ is specifically engineered and tested for extended drains up to 80,000 kms*.
What kind of hydraulic oil goes in a John Deere skid steer?
CASTROL VECTON LONG DRAIN 10W-40 E6/E9.
What kind of hydraulic fluid does a John Deere 1023e take?
(1) Hydraulic oil filter. (4) gallons of Low Viscosity HY-GARD Hydraulic Oil.
What oil goes in John Deere front axle?
Member. 80-90 LS in the Axle, Hy Gard in the hubs, but Hy Gard will do just fine in the axle, its what JD tell you to use.
How much hydraulic fluid does a John Deere 1023E take?
John Deere 1023E Transmission
| Transmission |
| Type |
hydrostatic |
| Oil capacity |
13 qts 12.3 L
|
| Oil type |
JD Hy-Gard |
| Hydrostatic transmission operated by two foot pedals and left-hand range shift. Tractor must be stopped to shift range. |
1 more row
How often should you change the oil on a John Deere 1025R?
(1025R) – M131803
Replace every 400 hours and as required. Check and service every 10 hours/daily, every 200 hours and annually.
How many quarts of oil does a John Deere 1025R tractor take?
John Deere 1025R Engine
| Engine Oil |
| Oil capacity: |
2.9 qts 2.7 L |
| Oil change: |
200 h |
1 more row
What kind of oil does a John Deere 1025R use?
Add New Oil
Add 2.7 L of John Deere Plus-50 II 15W40 Oil to the machine’s crankcase. Start the engine, and check for leaks. If you need to top off your 1025R make sure the engine is turned off.