What is the difference between diesel fuel and reefer fuel?

Chemically, reefer fuel is similar to diesel. However, it is not the same as diesel because it can only be used on private property. It is dyed red to prevent misuse or confusion in its intended purpose. It can be used to maintain refrigeration in reefer vehicles – but not to power the truck.

How much fuel does a reefer burn?

Modern reefer units use between 0.4 and 1.1 gallons of diesel per hour of engine run time. In automatic mode, the engine runs a fraction of the time that the unit is switched on and protecting cargo, so fuel consumption per hour most likely will be at the low end of the estimate.

RELATED READING  What is the cheapest most reliable small SUV?

How long can full reefer fuel run?

Since a reefer unit is on a closed loop system independent of the truck, driving habits don’t affect fuel efficiency. However, a poorly maintained reefer unit could increase your fuel consumption. If everything is running close to normal, a reefer’s 50-gallon tank could last up to 4-5 days.

How long does 7 gallons of reefer fuel last?

How Long Does a Tank of Reefer Fuel Last? Reefer trucks burn around 3/4th of a gallon of reefer fuel per hour, and most tanks are 50 gallons. With that, reefer tanks usually need to be filled every 2 or 3 days, but again this also depends on freight requirements.

What is the difference between diesel fuel and reefer fuel? – Related Questions

How many gallons of fuel does a reefer hold?

A standard reefer fuel tank holds 50-gallons, though train cars have tanks as large as 200-gallons. Most reefer tanks burn between 0.4-gallons to 1.1-gallons per hour.

How much fuel does a refrigerated container use?

Reefer genset frequently asked questions (FAQ)

Although an exact figure cannot be provided, you can expect fuel consumption to be between 2.5L and 3L per hour depending on the reefer load. The age of the reefer also has an impact as the older reefers work the gensets slightly harder than the newer reefers.

How much does it cost to run a reefer trailer?

But reefer rates per mile vary for several reasons. The average national rate is $2.97 per mile, but this rate will differ from one state to another. Other factors that affect the rate per mile include: Distance the cargo is shipped.

RELATED READING  How much are you allowed to tint your windows UK?

What is the average reefer rate per mile?

Reefer Freight Rates – December 15, 2022

Reefer freight rates average $2.74 per mile, a $. 06 drop from the November average. Reefer rates are highest in the Midwest, averaging $3.27 per mile. The lowest rates are in the Southeast, with an average of $2.45 per mile.

Why do reefer drivers make more?

The truck routes for reefer drivers allow them to get in more weekly miles. This, of course, means more money earned. More miles per week means that reefer drivers take better advantage of the available driving hours than any other type of haul.

Why do reefer loads pay more?

Because reefer trailers are more expensive to run and maintain, reefer load rates are generally higher than dry vans. But reefer freight rates can vary greatly depending on your location, the cargo you need to ship, and many other factors.

Is a reefer profitable?

Reefer loads can be very lucrative, especially sensitive loads.

What pays more dry van or reefer?

The cost of operating dry vans varies depending on demand and pricing fluctuations in your industry. Shippers will pay extra for reefer, so you may charge more for using a refrigerated truck.

How much does a 40ft reefer container cost?

Average price of refrigerated shipping container
High-demand location Container (used) Average price
Europe North 40ft HC Reefer US$ 6,264
North East Asia 20ft DC Reefer US$ 9,834
40ft DC Reefer US$ 8,195
40ft HC Reefer US$ 5,895

What are the best states for reefer loads?

Top states for reefer and refrigerated loads include Texas, California, Illinois, Ohio and Georgia. Top states for van loads include Texas, Illinois, Ohio, California and Georgia. The population of a state or the metropolitan areas within a state make it more difficult to travel through states.

RELATED READING  What year did Kia Sorento have engine problems?

What kind of loads pay the most?

The size and weight of a truck load

Heavy-haul loads may require specialized operators, permits, or even heavy-duty equipment. Oversized loads and cargo over 80,000 pounds of gross weight will usually be a better-paying job.

What pays more reefer or flatbed?

Higher Pay Per Mile

Refrigerated truck drivers typically average more per mile than dry van and flatbed drivers. At Knight Transportation, reefer drivers average 2-3 cents more per mile.

What state has the highest paying freight?

Highest-Paid Truck Drivers By State
Rank State 90th Percentile
1 Delaware $106,000
2 Rhode Island $105,000
3 Connecticut $104,000
4 New Jersey $104,000

What is the hardest state to get a CDL?

In fact, a study by Siegfried & Jensen shows Washington is the hardest state in the nation to get a driver’s license.

What type of trucking is most in demand?

7 Truck Driving Jobs That Are Always In Demand
  • # 1: DRY VAN DRIVERS. This is a gateway job when you first start out in the trucking industry.
  • # 2: FLAT BED DRIVERS.
  • # 3: TANKER DRIVERS.
  • # 4: REFRIGERATED FREIGHT DRIVERS.
  • # 5: FREIGHT HAULERS.
  • # 6: LTL FREIGHT DRIVERS.
  • # 7: LOCAL, REGIONAL AND OTR DRIVERS.

What is the easiest type of freight to get?

Dry Van And Refrigerated Freight

Most rookies start out hauling a dry van or refrigerated freight because they are the most common types of freight available and they require little in the way of specialized training.

Leave a Comment