Firestone Transforce AT2
Compared to the Transforce AT it has deeper tread features to improve wet and snow traction and prolong the good performance of the tire over its service life. Notice the deeper tread pattern on the Transforce AT2 compared to its predecessor tire.
Are Firestone transforce AT2 good in snow?
The Transforce AT2 is designed to provide on- and off-road traction in dry, wet and wintry conditions, including snow.
How many ply is transforce AT2?
Product information
| Manufacturer |
Firestone |
| Tread Type |
Non-Directional |
| Ply Rating |
10-Ply
|
| Rim Width |
7.5 Inches |
| Tire Diameter |
31.6 Inches |
How many ply is Firestone AT2?
Internal construction of the Destination A/T2 features a robust, two-ply polyester casing to blend durability and ride quality.
What is the difference between Firestone Transforce AT and AT2? – Related Questions
What ply tire is best for 1/2 ton truck?
Some drivers with half-ton trucks also prefer to use a 10-ply tire for increased towing capacity. Higher load carrying capacity tires make towing easier because their stiffer tires help stabilize loads and reduce sway at speed.
What does at2 mean on tires?
On-/Off-Road All-Terrain.
How many ply is Michelin LTX at2?
Is E2 a 10 ply tire?
However, modern tire construction uses fewer, stronger plies. Therefore, load range simply defines the tire’s toughness and maximum allowable air pressure, as opposed to specific information about the actual plies being used.
| Load Range and Ply Rating |
| E2 |
10 |
@ 65 PSI |
| F1 |
12 |
@ 95 PSI |
| G |
14 |
@ 110 PSI |
Are all 10 ply tires Load Range E?
Are All 10 Ply Tires Load Range E? Yes, all load range E tires are 10 ply. This is because load range is determined by the number of plies the tire’s construction has. Therefore, load range E means that the tire sports a 10-ply structure, which corresponds with its load durability.
How many ply is a Cooper AT3?
The internal construction of the Discoverer AT34Sconsists of a durable, two-ply polyester casing. A single-ply, nylon reinforcement above two high-strength steel belts further increases durability and handling response, along with providing high-speed stability.
How many plys should a truck tire have?
Most radial truck tires, for example, have a total of five plies. There’s one steel body ply and four belts under the tread. What is different today is the strength of the steel cables in those plies or the number of cables per inch.
Does tire ply matter?
The ply rating translates in a very direct way to tire capabilities and limitations, especially when it comes to inflation and load capacity. If you plan to haul, tow, or carry heavy loads with your vehicle, then understanding the ply rating of your tires is a must.
How often should you rotate Cooper AT3 tires?
When to rotate your tires. Most people should think about rotating their tires every 6,000-8,000 miles.
Is it OK to replace 3 tires at a time?
Placing the new tires on the rear axle helps maintain safer and more predictable handling. As you approach 70 percent worn or more, you should just replace all four tires.
Is it OK to rotate tires every 3000 miles?
“By rotating your tires, you give the tires a chance to even out their wear and get extended life out of your tires,” Edmonds explains. He recommends having your tires rotated about every 3000 to 5000 miles, or at least every time you go in for an oil change.
At what mileage do manufacturers recommend rotating tires?
How often should I rotate my tires? Tire manufacturers typically recommend rotating tires every 6,000 to 8,000 miles. Moving the tires from front to back (and side to side in some cases) evens out wear and extends tire life. A good guideline is every 6,000 miles or every six months.
Should you rotate tires every oil change?
As a general rule of thumb, you should rotate your tires about every six to eight thousand miles. A good way to remember is to have them rotated every time you get an oil change. You may need to get your tires rotated more often if you drive a performance vehicle, for instance, or if you notice substantial uneven wear.
Is it OK to rotate tires once a year?
We suggest you follow the recommended schedule outlined in your owner’s manual, but rotate the tires (and change the oil) at least once a year. You don’t have to go to a car dealership to have a regular rotation done, and many tire dealers and other repair shops will perform both jobs for about $30 total.