You can use a steamer to remove window tint and this is often seen as one of the quickest and easiest ways to do it. If you don’t have a steamer available, one can be rented. Use the steamer on both the interior and exterior (if possible) of the window to loosen the film and peel it away.
Removing window tint may prove to be a daunting task for many building owners. As such, most of them opt for hiring the services of professional tint removers. For those who fancy trying such tasks by themselves, using a hairdryer, ammonia, steamer, and soapy water helps remove window tint easily and efficiently.
But even at the highest setting removing the window tint with a hair dryer requires more time than a steamer. Here’s how to remove tint from your car windows using a steamer or heat gun: Roll down your car window to keep the edge of the tint film at the top visible.
How do I remove old window tint from my car?
There are two basic ways to remove tint: heat and scraping.
#1 – Hairdryer or Heat Gun
Hold the hairdryer about two inches from the window and run it on high until the glue melts enough to pry the edge up with your fingernail.
Angle the dryer so it hits where the film and window meet, slowly peeling as the glue softens.
What is the easiest way to remove window tint? – Related Questions
Does WD 40 remove tint?
WD 40 is something handy and can work to remove tints. But it will leave your surface very oily and if it is not cleaned off properly, it will collect dust on the surface.
Will rubbing alcohol remove window tint glue?
You can remove glue from car window tint using rubbing alcohol, a common household staple that will make this job quick and easy. You will also need a soft microfiber cloth and some warm, soapy water. Soap and water will help soften the glue, so it loses its adhesion to the tint.
Is it hard to remove old tint?
Our Expert Agrees: Glass is difficult to scratch, so you can run a razor blade across the glass with a lubricant to remove the tint. You can also use a razor blade to remove the sticky residue that is left behind after the tint is gone. Another option to remove the sticky residue is using a citrus-based cleaner.
Using a hairdryer is another simple way to get rid of your old window tints. The heat produced by the dryer is just what you need to soften the adhesive in your window and make it easy for you to peel off the tint.
How do you remove rear window tint without damaging defroster?
Use your fingernail or razor blade to lift the window film in a corner of the window, and try to peel the film off in one entire piece. Be careful not to cut the defroster lines. Keep the tint moist with ammonia as you strip. Use a razor blade to scrape off any tint that did not peel.
Does vinegar remove window tint?
Fill your spray bottle with the ammonia or vinegar, and soapy water. Spray the area with the mixture, being sure to cover the entire surface. Let the mixture sit and respray the tint when the mixture begins to dry. One way to make the process faster is by using plastic wrap to cover the area to keep the moisture in.
Does heat help remove tint?
Too much heat will cause the tint to melt to the window. Pass the heat gun on the outside of the window in circular motions. Continue the process until the window is warm to the touch. Once the window is warm, use a razor blade to pull back a corner of the window tint.
Just mix water and a small amount of liquid soap in a clean spray bottle. Professionals recommend baby shampoo or dish soap without any kind of grease-cutting agent as this may interfere with film adhesion. Rear windows have compound curvatures that render the application of window tinting film more difficult.
Do you remove tint with water?
Methods for Removing Window Tint Yourself
Applying heat to melt the adhesive or peeling the tint off with ammonia or soapy water are all easy and effective ways to remove even professional car window tint.
Can you use vinegar and water on tint?
Can I clean tinted windows with vinegar? Yes, a vinegar and water solution cleaner is a good way to clean tinted home windows.
What happens if you put Windex on tint?
You can use Windex® Ammonia-Free Glass Cleaner on your car’s tinted windows, mirrors, glass, chrome, stainless steel, plastic, and vinyl surfaces. For a streak-free shine, clean car windows when the surface is cool and out of direct sunlight whenever possible.
Can I use Windex to remove window tint?
Auto glass technicians even use ammonia to assist in peeling off tint because it helps unglue it from the window. Unless you are trying to discolor, damage, or take off your window tint, steer clear of any cleaning products that contain ammonia, including Windex Original.
What can you not clean window tint with?
Avoid using ammonia-based window cleaners at all costs, as these can lighten and dry out your tint. You should also steer clear of abrasive scrubbing products, including paper towels, newspapers, and scouring pads.
Can you use paper towels to clean tinted windows?
Don’t use paper towels, because the rough fibers can scratch the tint. Certain types of cotton towels or T-shirts can be just as abrasive as paper, too. Finally, you’ll want to have The Absorber on hand to dry your tinted windows once they’re clean.