A: Kickdown is a downshift in an automatic transmission triggered when the driver pushes the car’s accelerator to the floor.
What is the kick down switch?
An electrical switch that is used to cause a transmission to downshift from a higher to a lower gear ratio.
How do I activate kick down?
Usage of kick-down mode
Commonly, the kick-down mode should be activated when the top gear is engaged; otherwise the process of acceleration won’t be intensive enough. The kick-down button is located under the gas pedal. It is necessary to press the gas pedal to the floor to activate the kick-down mode.
What is the purpose of a kick down cable?
One component that helps both drive systems communicate is the kickdown cable. This device helps the engine relay information on revolutions per minute (RPM) to the automatic transmission and essentially tells it that it’s time to shift gears.
What is the kick down? – Related Questions
Do all automatic cars have kickdown?
Do all Automatic Cars have Kickdown? Almost all automatic cars have the kickdown feature. Earlier automatics, or basic modern automatics simply have a switch that’s activated by the driver pressing the accelerator pedal to the floor.
Is a kickdown cable necessary?
In fact, if you don’t mind downshifting manually with the shift lever when passing, there’s really no need for a functional kickdown cable or switch at all. Even manual downshifting to obtain passing gear may not be needed in the ultralightweight T-bucket’s case because it has so little inertia.
Does throttle cable affect transmission?
The throttle valve cable is used to control the line pressure, downshifting and the feel of the shifting. When the throttle valve cable is out of specification, the transmission can shift early, shift late or not shift at all.
How much does it cost to replace a shifter cable?
On average, it will cost approximately $300 to replace a gear shifter cable. The typical price range is between $200 to $600, though some car brands might be more expensive to repair. You can tighten and service a loose shifter cable for approximately $100.
What is kickdown BMW?
The kick-down switch signals the transmission to downshift or “kick down” to the lowest usable gear (based on road speed) when you mash the throttle pedal to the floor.
Does a TH400 have a TV cable?
Instead of a linkage or cable, the TH400 uses an electrical switch that is most often mounted on the carburetor.
How do I know if I have a Turbo 400 transmission?
It is identified easiest by its “375-THM” designation cast in the underside of the tail housing. The TH475 was an extra-heavy-duty version, and was found in larger trucks from 1971 on. If you are trying to determine the TH400 from another in a vehicle, a fast way to tell is to look at the kick down mechanism.
Does a Turbo 400 have a passing gear?
Re: No passing gear, TH400 (blue_74)
The switch is mounted to the gas pedal. With the ignition on , you should get 12v at one side of the switch. Make sure that the connection to the transmission itself is in good shape.
What vehicles came with 700R4?
Vehicles Equipped the 700R4
- Blazer: 1982-1991.
- Caprice: 1982-1992.
- Corvette: 1982-1992.
- Camaro: 1983-1992.
- Suburban: 1984-1992.
- Astro Van: 1985-1992.
- S10 Blazer: 1989-1992.
- S10 Pickup: 1989-1991.
What speed should a 700R4 shift at?
We will say that, when properly adjusted, the First-to-Second shift should occur at 15-20 mph; Second-to-Third shift at 25-30 mph; and Third-to-Fourth shift at 40-45 mph.
How do you check transmission fluid level?
Check the Level
With the engine warmed up, leave the car idling in park on a level surface. Pull out the dipstick, wipe it clean, replace it slowly, and then pull it back out. Check the fluid level—how high the fluid comes up on the dipstick—against the “full” and “low” or “fill” marks on the dipstick.
What is the cost of a 700R4 transmission?
700R4 Transmission – $1,595| 5-Year Warranty.
What fluid goes in a 700R4?
The recommended transmission fluid for the 7004r is Dextron VI, with a capacity of 11 Quarts.
What years did Chevy use the 700R4 transmission?
The General Motors 700R4 transmission was manufactured by Chevrolet in 1981 to run with 1982 model year vehicles. It is a four-speed automatic transmission with overdrive and was introduced as a way to make V8-powered cars and trucks more efficient.
How much horsepower can a 700R4 transmission handle?
The newest version of the Super StreetFigher GM 700R4 Transmission includes all of the features of the original, as well as the ability to handle 1000+ horsepower. It is also updated with a new 300M input shaft to allow for much greater torque capacity.
What transmission can handle 1000 HP?
Description. The PerformaBuilt Hydramatic 400 Racing Transmission is a mega-performance transmission capable of 1000 RWHP.