Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
What type of oil does a 2017 Mercedes C300?
Viscosity
| Viscosity |
0W-30, 0W-40 (All TEMPS) 5W-30, 5W-40 (Above -25)
|
| Capacity: |
6.9 quarts (with filter). 4MATIC. After refill check oil level. |
| Capacity: |
7.4 quarts (with filter). Base. After refill check oil level. |
| Torque: |
22 ft/lbs (Oil Drain Plug) |
Can I use 5W-30 for Mercedes-Benz?
Mobil 1 ESP 0W-30 and Mobil 1 ESP 5W-30 advanced full synthetic motor oils approved against Mercedes-Benz specs 229.31, 229.51 and 229.52.
What brand oil does Mercedes-Benz use?
Synthetic Engine Oils for Mercedes-Benz Vehicles
Mobil 1 Tri-Synthetic Formula 15w-50. Mobil 1 Tri-Synthetic Formula 0w-40. Valvoline Synpower Full Synthetic Motor Oil 5w-40. Quaker State Full Synthetic European Formula 5w-40.
What kind of oil does a 2014 Mercedes C300 take? – Related Questions
Which is the best oil for Mercedes?
You may have seen debates over the pros and cons of synthetic and regular motor oil, but when it comes to Mercedes-Benz, synthetic is the only choice. Synthetic oil has been refined beyond the standards of conventional motor oil to create a longer-lasting formula that optimizes performance.
Does Mercedes need special oil?
The required oil for your Mercedes will depend on the type of engine, the climate, and several other factors. However, the manufacturer recommends using synthetic oil, especially if you drive a 2009 or newer model.
What happens if you put regular oil in a Mercedes?
2. No Engine Cleanliness And Protection. As regular oil moves through the vehicle’s engine, it degrades slowly thus leaving harmful deposits and even leading to the formation of sludge. It can affect the performance of your car’s engine and the life of the vehicle.
How much is an oil change for a Mercedes C300?
Mercedes-Benz C300 Oil Change Cost Estimate. The average cost for a Mercedes-Benz C300 oil change is between $165 and $181. Labor costs are estimated between $56 and $71 while parts are priced between $108 and $110.
Can anyone change the oil in a Mercedes?
A Mercedes oil change may be expensive at a dealership, but it doesn’t have to be. By doing your own oil changes and other basic services on your Mercedes, you can save a lot of money, and take pride in knowing that it was done right by the person who cares the most about your car: you.
Does Mercedes-Benz have their own oil?
When synthetic oil is produced, the crude is refined and broken down into separate molecules. From there it is further distilled, and other chemicals are added to give the new substance its incredible properties. Mercedes-Benz, and most other automakers, use synthetic oil in their new vehicles for several reasons.
When did Mercedes start using synthetic oil?
What type of oil you use in your Mercedes Benz also makes a big difference when determining how often you need to change your oil. These days, all Mercedes-Benz models recommend synthetic oil – that’s pretty much true for every car built after 2010.
What oil should I use for a high mileage Mercedes?
1) Engine oil. Be sure that your engine oil and engine oil filter are changed on a regular schedule. We at German Auto Center recommend every 5,000 miles for older models that are using mineral based oil and every 7,500 miles for later model engines requiring Mobil 1 0W/40 full synthetic engine oil.
What is the difference between 229.51 and 229.52 oil?
Marketed by Daimler as “Low SPAsh multigrade service engine oils,” approved MB 229.52 lubricants must deliver at least 0.7% fuel economy improvement compared to the MB 229.51 and MB 229.31 specifications.
Is MB 229.52 synthetic?
Motul Specific 229.52 5w-30 is a fully synthetic lubricant developed specifically for Mercedes-Benz diesel engines and some petrol engines.
What is the MB 229.5 spec?
The mb 229.5 specification is for fuel economy engine oil for extended oil change intervals (vehicles froom 2002 onwards) with service indicators. Special, stricter requirements than ACEA A3/B3. For use in all petrol and diesel engines. These engine oils also comply with mb 229.1 and mb 229.3 specifications.
What is low Spash oil?
Low SAPS Oil is simply oil that has low levels of Sulphated Ash, Phosphorous, and Sulphur. Each manufacturer will decide which SAPS level will be most effective for their engine and will choose an ACEA C rating, which you will find in your vehicle’s handbook.
Should I use 5w30 or 5w40?
5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
Can I use C3 oil instead of C1?
ACEA C grade oils are for the most, not interchangeable with one another depending on the particular applications. e.g. An ACEA C1 engine oil, cannot be used where an ACEA C3 oil is specified by the manufacturer as the C1 has a lower Sulphated Ash requirement than a C3 oil.
What’s the difference between C1 and C3 oil?
C1 and C4 are low-SAPS oils, while C2 and C3 are mid-SAPS oils. On the other hand C1 and C2 oils have lower HTHS viscosities, while C3 and C4 oils have higher HTHS viscosities.
Is all 5W30 fully synthetic oil the same?
As a result, every engine needs its own specific package of additives. And that’s why there are so many 5W30 oils, each with a different composition and OEM (Original Equipment Manufacturer)-specification. This means we can honestly say that a “universal” or one-fits-all 5W30 lubricant does not exist.