7 liters 5W-30 BMW 330i motor oil, oil filter, and hardware for 2006 3.0L 24V, including 330i / 330xi E90, E91, and E92 applications. Oil carries OEM approval for BMW Longlife-01 oil standard.
With filter 5.5 quarts. After refill check oil level.
Torque:
Oil Drain Plug18 ft/lbs Replace drain plug seal.
What type of oil does a 2020 BMW 330i use?
Castrol EDGE Engine Oil Full Synthetic 0W-20 5 Quart
Notes: OE Recommendation, Full Synthetic. 0W-20.
What oil does a 2006 BMW 330i take?
The 2006 BMW 330i oil type is SAE 5W-40 and the engine has a capacity of 5 quarts of motor oil. Full synthetic is the preferred blend, but getting a motor oil specifically for European cars is a smart move to improve lubrication and performance.
5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
How much oil does a BMW 330i take?
The BMW 330i’s oil capacity is 5.6 quarts of fully synthetic motor oil.
How much oil does a 2006 330i BMW take?
With filter 6.9 quarts. After refill check oil level.
How do you reset the oil light on a 2006 BMW 330i?
Does BMW service mean oil change?
Causes of a Service Engine Light Illuminating
Needs Oil Changes: Your BMW service engine light will come on whenever it is time for your oil change. The purpose is to let you know that the maximum time and miles you can drive with your current oil have come.
How do I reset my BMW computer after oil change?
Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.
How do you check the oil on a 2006 BMW 330i?
What oil goes in a BMW 3 Series?
An oil that has been awarded the BMW LongLife 04 specification, such as Castrol Motoröl 5L SAE 5W-30, is ideal for use in the 3 Series F30 model.
What oil do I put in my BMW?
The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines.
Most BMW engine comes with a 5W-30 from the factory. BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.
Does BMW need specific oil?
With motor oil being the most important fluid next to gasoline in your BMW vehicle, it’s important that you don’t scrimp on the quality or type of motor oil you put in your BMW. That’s why BMW recommends the exclusive use of synthetic motor oils inside all BMW engines.
Can BMW use regular oil?
BMW recommends synthetic oil for use in its engines. Every car is different, however, so you should check your vehicle owner’s manual to find out which oil works best in your specific situation.
Does BMW require special oil?
Do BMW Group vehicles require special oil? BMW Group vehicles require engine oils that meet the specifications developed by BMW, which vary depending on the make, model, and year of the vehicle. All BMW Group engine oils meet BMW Group specifications for all Group engines.
Is BMW oil fully synthetic?
BMW Longlife-04 Oil Spec
This formula is always a fully synthetic long-life oil with a variety of viscosity options available such as SAE 0W-30, 5W-30, and 5W-40.
Is Mobil 1 approved for BMW?
Using the right Mobil 1 product during routine servicing and according to your vehicle’s handbook will not affect the BMW manufacturer’s warranty.
EDGE 5W-30 is also approved for use in modern BMW and Mercedes gasoline and diesel engines including those equiped with a DPF that require BMW Longlife -04 or MB-Approval 229.51 specifications. Castrol EDGE 5W-30 is engineered to; – Pass the toughest VW motor oil tests to protect all parts of your engine.