What size is lt255 80R17?

Are wider tires better?

From a safety point of view, both types have their good sides: On a dry road, wider tires will offer more grip than narrow ones, but the risk of aquaplaning will be higher with wide tires. – In the winter, narrow tires are better under extreme conditions as they provide higher surface pressure against the road.

What does 265 70R17 mean for tires?

An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.

What do the 3 numbers mean on tire size?

B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. This may also be referred to as the section width. C: ASPECT RATIO The forward slash separates the tire width number from the two-digit aspect ratio.

What does 70R16 mean on a tire?

P215/70R16 100S. The next number following the slash (/) indicates the height of the tire in a percentage of the section width. In our example, the number is 70, which means the tire height is 70% of the section width, which is 215 millimeters. The height of this tire would be 150.5 millimeters.

What does 225 50R17 mean in tires?

What 225/50R17 Means. The number 225 identifies the tire section width (the measurement of the tire from sidewall to sidewall in millimeters). This tire has an aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width.

Do bigger tires affect horsepower?

Wheel size does not influence an engine’s horsepower. It just changes the engine’s rpm for a given road speed. Thus, it is the same as changing the rear end gear ration, or even more basically, it’s the same as running in a different gear.

How much difference in tire size is ok?

Tire Speed Difference (Mph)

As a general rule, you want replacement tires that are within 3 percent of the diameter (height) measurement of your existing tires’ diameter — assuming your current tires are what your owner’s manual recommends.

Which tire is taller 50 or 60?

Aspect ratio refers to the tire’s section height in relation to its section width, as a percentage. For example, a 60-series tire features a sidewall that is 60% as tall as the tire’s section width. A 50-series tire will feature a shorter sidewall, at 50% of section width.

Do taller tires handle better?

Poor Handling

Large tires further add weight and limit the movement of your drivetrain. These slow down your vehicle’s acceleration and reduces its maximum speed. The increase in height, while helpful, also makes a car less stable. Overall, you end up with poor handling.

What size tires give the best ride?

Smaller wheel = smoothest ride quality, low stability, predictable handling, average road noise. Medium wheel = average ride quality, average stability, predictable handling, low road noise.

What is the advantage of taller tires?

Perhaps the most significant benefit of larger tires is the extra distance it creates between your car’s undercarriage and the ground. This is particularly important for off-roading enthusiasts who need that extra space to clear rough terrain. Higher clearance also helps drivers see farther both on and off the road.

Do bigger tires give a smoother ride?

As a general rule, bigger wheels result in a rougher ride. Switching to a smaller wheel and a thicker tire can give you a smoother ride without any major modifications to your car. However, if you go too crazy and change your wheel size too much, it can cause some problems.

Do bigger tires affect engine?

Bigger wheels mean heavier wheels, and heavy wheels force your engine to work harder and use up more gas. How much gas you use will be dependent on the strength of your engine. The loss in miles per gallon will be more apparent if your car has a smaller engine. These engines are not made to handle big, heavy wheels.

Do you need an alignment with taller tires?

This is because tires that are wider or taller than original equipment tires stretch the suspension slightly and cause changes in camber and caster angles, as well as toe angles. In order to make up for these changes, an alignment needs to be performed on the vehicle by a qualified technician using proper tools.

What is the rule of thumb for replacing tires?

The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. The idea of the penny test is to check whether you’ve hit the 2/32” threshold.

How soon should I get an alignment after new tires?

For the most part, doesn’t matter whether you get your alignment before or after having your new tires put on. Most experts agree that the only effect worn tires have on your alignment is a change to the vehicle’s ride height which, given today’s steering and suspension design, should be negligible.