What size tire does a 2018 Nissan Rogue have?

Can I get my tire size from my vin?

You can also find your vehicle’s trim and tire size by VIN, or vehicle identification number. You can then use a VIN decoder tool to find the trim level of your vehicle.

Are 33 inch tires the same as 285?

A lot of people do not know “are 33-inch tires the same as 285”. They assume that two of these metrics are different. The answer is “yes, it is”. 285 tires refer to the width in millimeters while 33-inch tires allude to diameter.

Should I get 33 or 35 inch tires?

33” tires are a bit more comfortable, while 35 inch tires offer better control. So, to summarize, if you plan on driving in rough terrain with many hills and valleys, go with 33 inch tires. If you plan on driving on flat ground or mostly on dirt roads, go with 35 inch tires.

How do I know if my tires are 33 inch?

A standard sized tire will be displayed in inches. A tire that reads 33 x 12.5 R15, is 33-inches in diameter (or tall), 12.5-inches wide, and will fit a 15-inch wheel. The door jam of your vehicle will also indicate what size tires the manufacturer recommends.

Are new tires 32 32?

New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.

Can you put a bigger tire on the same rim?

As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.

Why are tires called 33?

In our example size, the tire will fit a 18-inch wheel. Some manufacturers build off-road tires using inches instead of millimeters, so you may see sizes like “33×17.” This simply means the total height of the tire is 33 inches and it fits a 17-inch wheel.

How much difference in tire size is acceptable?

Tire Speed Difference (Mph)

As a general rule, you want replacement tires that are within 3 percent of the diameter (height) measurement of your existing tires’ diameter — assuming your current tires are what your owner’s manual recommends.

What does R mean on a tire?

“R” stands for the construction method of the tire indicating the tire is a radial tire. The following two numbers (16) indicate the diameter of the wheel rim in inches. The next two or three numbers (94) indicate the load index of the tire.

What size tire is a 32 inch?

When should I change my tires 4 32 or 2 32?

Put George Washington’s head into one of the big grooves. If the top of his head is flush with the tread, you have about 4⁄32 inch of tread left, meaning you have some grip remaining for rainy or snowy conditions. That’s the time when you should start shopping for new tires.

At what 32nd should tires be replaced?

Check For Tread Depth

To meet legal safety standards in the U.S., a tire’s tread needs to be at least 2/32” deep. If the tires do not meet the 2/32” standard or are approaching not meeting it, you should replace your tires. When replacing tires, it’s important to select the right tire size for your vehicle.

Should I replace my tires at 3 32?

Low tire tread: Many mechanics recommend replacement when your vehicle reaches between 3/32 and 4/32 of an inch. This is especially true if you live in an area with severe climates to prevent hydroplaning and other inclement weather risks.

How can I tell if my tires are worn out?

The easiest way to check wear on your tire is with a penny. Place a penny upside down in between the tire tread as shown. If you can see the top of Lincoln’s head, the treads are worn and tire replacement is needed. A quick and easy way to check your tire wear is with a tread depth gauge.