What size tire is on a 2018 Dodge Charger RT?

Can I put different size tires on my car?

Once you choose a tire size for your vehicle, you’ll want to stick with that size when you buy replacements. The reason for this is that a differently sized tire can confuse your speedometer and even cause damage to your vehicle’s anti-lock braking systems and stability system calibrations.

Can I change tire size on my car?

While there are always exceptions to any rule, most passenger cars lack the needed clearance between fenders and suspension components to allow for such an increase. Most trucks, SUVs and crossover vehicles, however, have adequate clearance that would allow for a taller tire size to be used.

Can you search tire size by VIN number?

You can also find your vehicle’s trim and tire size by VIN, or vehicle identification number. You can then use a VIN decoder tool to find the trim level of your vehicle.

Are 33 inch tires the same as 285?

A lot of people do not know “are 33-inch tires the same as 285”. They assume that two of these metrics are different. The answer is “yes, it is”. 285 tires refer to the width in millimeters while 33-inch tires allude to diameter.

How do I know if I have 33 inch tires?

A standard sized tire will be displayed in inches. A tire that reads 33 x 12.5 R15, is 33-inches in diameter (or tall), 12.5-inches wide, and will fit a 15-inch wheel. The door jam of your vehicle will also indicate what size tires the manufacturer recommends.

How to determine the size of a tire?

To calculate the overall diameter of a tire, the sidewall height must be multiplied by 2 (remembering that the tire diameter is made up of 2 sidewalls, the one above the wheel and the one below the wheel touching the ground) and add the diameter of the wheel.

Can you put a bigger tire on the same rim?

As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.

What does the R mean on a tire?

“R” stands for the construction method of the tire indicating the tire is a radial tire. The following two numbers (16) indicate the diameter of the wheel rim in inches. The next two or three numbers (94) indicate the load index of the tire.

What does LT mean on a tire?

What Does LT Mean on a Tire? An “LT” on your sidewall before that long string of numbers and letters denoting your tire size signifies the tire is a “Light Truck-metric” size; it was designed for use on a vehicle that carries heavy cargo loads or tows a large trailer.

Will LT tires ride rough?

LT tires are built for heavy vehicles, so their stiffness can give your vehicle a harsh ride, and since they require higher tire pressure, they can throw off your vehicle’s TPMS (Tire Pressure Monitoring System, a safety feature that alerts you to improper pressure in your tires).

Are LT tires noisy?

Because of their stiffer sidewall, LT tires don’t absorb bumps very well, causing more vibrations and road noise, particularly in lighter trucks and SUVs.

Do I really need LT tires?

Light Truck Tires

Their “heavier” construction also makes them superior for hauling heavy loads and navigating rough terrain. Additionally, LT-metric tires often provide better handling when towing heavy equipment or supplies, which makes them a top choice for hardworking trucks and SUVs.

Is it OK to replace front tires only?

Reasons to Avoid Replacing Only One Tire

To achieve optimum vehicle handling, ride comfort, and road traction, it’s generally recommended that you have all four tires replaced at the same time.

What PSI should I run my LT tires at?

If a LT265/75R16 Load Range C is to be used as a replacement, to carry an equivalent load the LT tire must be inflated to 50 psi. Even an LT265/75R16 Load Range D or E tire must be inflated to 50 psi to carry the load the P-metric tire carries at 35 psi.