What size tires go on a 2013 Subaru Legacy?

Can you replace tires with different size?

Once you choose a tire size for your vehicle, you’ll want to stick with that size when you buy replacements. The reason for this is that a differently sized tire can confuse your speedometer and even cause damage to your vehicle’s anti-lock braking systems and stability system calibrations.

How much difference in tire size is acceptable?

Tire Speed Difference (Mph)

As a general rule, you want replacement tires that are within 3 percent of the diameter (height) measurement of your existing tires’ diameter — assuming your current tires are what your owner’s manual recommends.

Can I get my tire size from my vin?

You can also find your vehicle’s trim and tire size by VIN, or vehicle identification number. You can then use a VIN decoder tool to find the trim level of your vehicle.

Are 33 inch tires the same as 285?

A lot of people do not know “are 33-inch tires the same as 285”. They assume that two of these metrics are different. The answer is “yes, it is”. 285 tires refer to the width in millimeters while 33-inch tires allude to diameter.

Should I get 33 or 35 inch tires?

33” tires are a bit more comfortable, while 35 inch tires offer better control. So, to summarize, if you plan on driving in rough terrain with many hills and valleys, go with 33 inch tires. If you plan on driving on flat ground or mostly on dirt roads, go with 35 inch tires.

How do I know if my tires are 33 inch?

A standard sized tire will be displayed in inches. A tire that reads 33 x 12.5 R15, is 33-inches in diameter (or tall), 12.5-inches wide, and will fit a 15-inch wheel. The door jam of your vehicle will also indicate what size tires the manufacturer recommends.

What size rims do I need for 33s?

33-inch tires work well with rims that measure 15 or 16 inches in width, while 35-inch tires should only be used with rims that are at least 17-inches wide.

Are new tires 32 32?

New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.

What size tire is a 32 inch?

Are 28 tires faster than 32?

‘Also a 28mm tubeless tyre is the fastest setup [in rolling resistance tests]. At 40kmh a high-quality clincher tyre with a latex inner tube is about 2 watts slower. And a 32mm tyre is only about 2 watts slower than an equivalent 28mm tyre.

When should I change my tires 4 32 or 2 32?

Put George Washington’s head into one of the big grooves. If the top of his head is flush with the tread, you have about 4⁄32 inch of tread left, meaning you have some grip remaining for rainy or snowy conditions. That’s the time when you should start shopping for new tires.

At what 32nd should tires be replaced?

Check For Tread Depth

To meet legal safety standards in the U.S., a tire’s tread needs to be at least 2/32” deep. If the tires do not meet the 2/32” standard or are approaching not meeting it, you should replace your tires. When replacing tires, it’s important to select the right tire size for your vehicle.

Is tire depth 3/32 is good for driving the car?

Low tire tread: Many mechanics recommend replacement when your vehicle reaches between 3/32 and 4/32 of an inch. This is especially true if you live in an area with severe climates to prevent hydroplaning and other inclement weather risks.

Should I replace my tires at 5 32?

A tire with a half-tread depth usually has 5/32 to 6/32 of an inch remaining. Tires are worn-out when they reach 2/32 of an inch, but you don’t need to go that low to see a substantial decline in performance on slick (wet, snowy, or icy) surfaces.