Ford Ranger 6′ (72.0″) Bed 2019, HARDware Series Standard Single Lid Crossover Tool Box by Dee Zee®. Dimensions: L: 63″ x W: 20″ x H: 13.2″. Volume: 7.4 Cu. Ft.
Ford Ranger 2006, Specialty Series Standard Single Door Top Mount Tool Box by Dee Zee®. Dimensions: L: 48″ x W: 16″ x H: 12″. Volume: 5.33 Cu. Ft.
Do all toolboxes fit all trucks?
Before investing in a new toolbox, be sure you have properly measured your truck to ensure you buy the correct size box. Each truck make and model is going to vary slightly, so it’s important that you do your research first.
What size toolbox fits a 2019 Ford Ranger? – Related Questions
What size toolbox does my truck need?
Measure the Distance Between your Bed Rails. This distance determines the maximum width your toolbox can stretch.
Determine the Height of your Bed Walls. For this number, measure how tall your truck bed is from the floor to the top of the rail.
Find the Distance Between the Base of your Wheel Wells and the Bulkhead.
What size toolbox fits a full-size truck?
The LUND Slimline Full Size 70-Inch Cross Bed Truck Tool Box is designed to fit most full-size trucks, LUND Standard Cross Bed boxes to maximize storage space while reserving room under the box for hauling large loads.
Are truck bed tool boxes universal?
Are truck tool box sizes universal? The tool box you need for your truck will be specific to your needs and vehicle size. Truck tool boxes do not necessarily fit all trucks. You should choose the type and form factor that makes it the most convenient for you to retrieve your tools and equipment.
How do you measure a tool box?
How do you attach a tool box to a truck?
How do you attach a tool chest to a truck bed?
Step 1: Measure the placement of the box carefully and drill four to six holes in the truck bed using a durable metal bit and a powerful drill. Step 2: Lower the tool box into place and line it up with the drilled holes. Step 3: Use J-hooks or a standard nut and bolt set to secure the truck tool box into place.
Never leave your tools in the back seat of your car or truck; they’ll be gone in an instant. Instead, lock them in the trunk or protect them with a heavy-duty truck bed tool box. Truck bed tool boxes mount on the rails right behind the cab.
How do you install a truck chest tool box without drilling?
Steps To Install a Truck Tool Box Without Drilling
Take the rubber plugs out of the holes.
Set the tool box inside the bed, lining its pre-drilled holes up with the holes in your truck bed.
Secure the box into place with J-hooks or regular nuts and bolts.
Tighten the bolts until they’re secure.
How do I keep my truck tool box from moving?
Fit A Foam Padding Beneath The Tool Chest
Before you place your tool chest, add foam padding to preserve your truck bed’s painting. Use a measuring tape to take correct measurements of the box to find accurate measurements of the foam padding.
What is the most secure truck tool box?
11 Highly Rated Truck Toolboxes to Keep Gear Safe in Your Pickup
Arksen Aluminum Diamond Plate Toolbox.
Black Aluminum Heavy Duty Toolbox.
SwingCase Truck Bed Storage Box.
Weather Guard Black Aluminum Saddle Box.
TruXedo TonneauMate Toolbox.
24-Inch Aluminum Plate Toolbox.
Low-Profile Truck Toolbox.
Pickup Truck Storage System.
Are weather guard tool boxes easy to break into?
The lock system on the Weather Guard Truck Toolbox will make their job a lot tougher, though. There are two good-sized latches to secure the front of the lid, and the automotive-style rotary push-button locks on the box stay recessed when the box is locked, making it tougher to pry or smash them off.
You can then use the hardware that the tool box came with or J-hooks or nuts and bolts to secure the box. If you need to purchase the hardware, most tool boxes require between four and six bolts. Once installed, tighten the bolts or hardware. Be careful to not overtighten them as they can damage your truck.
How do you tie down a tool box?
How do you mount a Ute toolbox?
How do I secure my van toolbox?
One of the most secure ways to keep thieves from getting to your tools, is to secure them in a heavy duty metal toolbox or tool chest, such as a Tuffbox. Tuffboxes can be bolted to the floor of your van, or secured with one of the Tuffbox chain locks in place.
How do you keep tools safe?
Top 5 tips to keep your tools safe
Step 1 – take your storage seriously. The harder your tools are to get to, the better.
Step 2 – be discrete. Help yourself by keeping your tools out of clear sight.