Viscosity
| Viscosity |
All TEMPS.0W-20
|
| Capacity: |
With filter 5.3 quarts. After refill check oil level. |
| Torque: |
Oil Drain Plug6 ft/lbs Replace oil drain plug. If the new oil drain plug does not latch after tightening to specified torque, the drain plug must be positioned so the latch mechanism is aligned. |
What kind of oil does a 2011 BMW 528i take?
Castrol Edge Synthetic Motor Oil 5W-40 5 Quart.
How much oil does a 528i BMW take?
Capacity: With filter 5.3 quarts. After refill check oil level.
Can you use 5W-30 oil in a BMW?
The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It’s the only oil approved in the US for BMW’s turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. It can also be used in most MINI engines.
What type of oil does a 2016 BMW 528i take? – Related Questions
Which oil is better 0W30 or 5W-30?
0W30 is the ideal oil for your automobile during the winter, especially if you live in a state or country with a very cold temperature. 5W30 is ideal for a wide range of temperatures. Therefore, it can be used in hot and cold climates.
Can I use 5W oil instead of 0W?
5W-20 has a similar viscosity level to 0W-20, also suited to low temperature climates, but has a slightly thicker oil viscosity than the latter. Alternating between the two may not cause any immediate damage, but it will severely affect your oil change interval length and overall engine performance over time.
Which is better 0W-20 or 5W30?
0W20 also provides better fuel economy than 5W30 in both colder and warmer environments. However, 5W20 only outperforms 5W30 at warmer temperatures. With the right oil in the engine, you can provide the protection it needs to keep running longer.
What happens if you mix 5W30 and 0W-20?
5W30 has a regular variant which is not suitable for the synthetic variants of 0W20 oil. Mixing contrasting variants could harm the engine in the long run and could even render the warranty of your car invalid.
Which is better 0W-20 or 0w30?
The 0w20 motor oil offers you a much more superior wear and tear protection on some of the essential or vital parts of the engine. The 0w30 motor oil, on the other hand, does not offer you the same assurance.
What happens if I put 5W20 instead of 0W20?
Both 0W20 and 5W20 are low viscosity and high-quality synthetic grades that can massively optimize fuel economy. Their properties are the same when used in fair-weather temperatures. Likewise, there is little to no difference between the two versions when used in cold conditions.
Can I use 5W30 instead of 0W20?
Can I use a 0W-20 in my car that recommends 5W-30? No, if your owner’s manual calls for a thicker oil, you should not use a thinner SAE grade nor use a thicker oil for a recommended thinner oil vis-grade. Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine.
Can I substitute 5W20 for 0W20?
So, you can substitute 0w20 with 5w20, but the latter will offer more resistance in its flow. 0w20 is a more preferred fuel option in cold temperatures, but 5w20 is also quite functional.
Can you put 5W20 in a 0W-20 car?
Our answer: In most cases, 0W-20 is a perfectly acceptable substitute for 5W-20. Both products are 20-weight motor oils at operating temperatures. However, the exception to using 0W-20 in your case may be if the vehicle is under warranty (see more below).
Is 0w20 good for hot weather?
0w20 is a fast flowing oil used in modern multi valve engines it will flow quickly through the engine when it is cold. If it is recommended by the manufacturer it should not be a problem in hot weather.
How long does 0W 20 oil last?
How Often Should You Change Synthetic Oil? Standard oil change intervals are typically listed at 5,000 miles or 6 months to ensure peak performance. Toyota models that are required to use 0W-20 synthetic oil extend that interval to 10,000 miles or 12 months.
Is 0w20 better than 5W20?
Sure, 0W20 will flow better than 5W20 at low temperatures, but the difference is minimal and both versions run thin in cold conditions. However, if you live in an extremely cold region, the 0W oil will do less damage than the 5W oil while starting the engine.
Why do new cars use 0w20?
Auto manufacturers are looking to make engines smaller and lighter while delivering more power than ever. To protect these smaller powerful engines, thinner oils with better ability to protect and clean engines are needed. This has led to 0W-20 being the fastest growing grade in the motor oil marketplace.
What happens if I put 5w20 instead of 5w30?
5W-20 oil, being the lower viscosity oil (thinner oil) than 5W-30, might help boost your fuel economy. And although you may not notice a vast difference, it does add up over time. However, remember that you should always use the motor oil recommended for your car by your engine manufacturer or mechanic.
What is 0W 20 stand for?
Breaking down the 0W-20 code, “0” is the oil’s viscosity at startup when the engine is cold, “W” stands for its winter certification, and “20” is the viscosity at higher temperatures. Lower numbers designate thinner, lower-friction oil.
Does 0W-20 damage engine?
Answer: Yes, 0W-20 is unquestionably safe for your engine. Manufacturers have been specifying 5W-20 and 0W-20 since the early part of the last decade and there is no evidence whatsoever that engine wear rates have increased.