The most common reason your car starts then dies immediately is because of a lack of fuel in the engine. This often happens because there is a small amount of fuel in the fuel rail, which helps to start the engine.
What would cause a car to start but not stay running?
The most common and obvious reason your car may start then die is the fuel shortage in your engine. This happens because there’s not enough fuel in the fuel rail, and there’s no fuel pressure to keep the engine alive. The reason isn’t always you forgetting to fill up your gas tank.
What are common problems with 2010 Chevy Traverse?
Problems found on the 2010 Traverse are severe and include engine failures, worn-out power steering systems, and issues with the air conditioning.
- Engine failures are the most common problem reported by owners at around 100,000 miles.
- Power steering system problems show up on a lot of models in the first 80,000 miles.
Is there any recalls on 2010 Chevy Traverse?
GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2009-2010 CHEVROLET TRAVERSE, BUICK ENCLAVE, GMC ACADIA, AND SATURN OUTLOOK VEHICLES. THE SECOND ROW SEAT SIDE TRIM SHIELD RESTRICTS THE UPWARD ROTATION OF THE SAFETY BELT BUCKLE WHEN THE SEAT BACK IS RETURNED TO A SEATING POSITION AFTER BEING FOLDED FLAT.
What would cause a car to shut off right after starting? – Related Questions
What is the most common problem with Chevy Traverse?
Con
- Problems with Brakes.
- A/C Issues.
- Transmission Failure.
- Engine Issues.
- Air Bag Problem.
- Steering Wheel Issues.
- Excessive Consumption of Oil.
- Shift to Park Problem.
How many miles will a 2010 Chevy Traverse last?
The average mileage you can expect from a Chevy Traverse is 200,000 miles.
What are the worst years for the Chevy Traverse?
- Chevrolet Traverse SUVs from 2009 to 2012 are some of the model’s worst.
- Electrical issues plague the 2014 model with a malfunctioning electronic module that could short-circuit and cause the car to stop, as well as a faulty fuel gauge.
- Traverse SUVs from 2020 don’t have many complaints but have seven recalls.
What is considered high mileage for a 2010 vehicle?
What is Considered High-Mileage? Typically, putting 13,000 to 14,000 miles on your car per year is viewed as “average.” A car that is driven more than that is considered high-mileage. With proper maintenance, cars can have a life expectancy of about 200,000 miles.
How much is a timing belt for 2010 Chevy Traverse?
Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).
Does the Chevy Traverse have recalls?
General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Traverse and 2021-2022 Buick Enclave vehicles. The harness connector to the left or right side roof rail air bag may have incompatible electrical terminals, which could prevent the air bags from deploying in a crash.
Is there a recall on the Chevy Traverse transmission?
2021 Chevrolet Traverse Recall
Action Need To Fix It: Dealers will replace the screw and clip, and inspect for signs of contact with the transmission, free of charge. Owner notification letters are expected to be mailed December 17, 2021. Owners may contact Braun customer service at 1-800-488-0359.
Does Chevy Traverse have engine problems?
Engine problems have plagued the Chevy Traverse across many models, including the 2010 and 2011 varieties. The most overarching complaint is engine failure, which has resulted in many customers paying a significant amount of money to have the piece replaced. Other engine problems included: Reduced engine power.
How much does it cost to put a timing chain in a 2010 Chevy Traverse?
The average cost for a Chevrolet Traverse timing chain and gear set replacement is between $2,080 and $2,418. Labor costs are estimated between $1,296 and $1,635 while parts are priced at $783.
What are the symptoms of a failing timing chain?
Signs of a Faulty Timing Chain
- Rattling Sound on Starting the Engine or Idling. A common finding in a vehicle with a bad timing chain is unusual rattling noise when the engine is started or when brakes are engaged.
- Misfiring Engine.
- Contaminated Engine Oil.
- Check Engine Light.
- Inability to Start the Engine.
How do I know if my timing chain needs replacing?
Timing chain replacement: warning signs
- Starting the vehicle is difficult.
- Noise in the timing chain.
- Check engine light illuminated.
- Engine misfires and sluggishness.
- When the engine is idling, it vibrates or shakes.
- The engine will not start.
Will a broken timing chain destroy my engine?
A broken timing chain will cause an engine to not start or fail while driving. If the belt is already broken, the engine won’t have enough compression to start. If it breaks or jumps while driving, the pistons will be damaged from contact with the valves. The valves themselves will bend and potentially ruin the engine.
Is there any warning before timing belt breaks?
You need to look out for signs and symptoms of a weakening timing belt so that you can take action before it is too late. These include loud clicking sounds coming from your engine, squealing sounds, and your engine failing to start at all.
Will check engine light come on for timing chain?
A stretched timing chain contributes to poor engine performance and increased emissions, triggering the check engine light and the storing of a diagnostic trouble code. A mechanic will need to inspect the code and prescribe the necessary repairs.