What years did the 5.4 Triton have problems? Based on my research, 5.4 Triton engines from vehicles manufactured between 2004 and 2013 seem to have the most problems. The earlier engines didn’t seem to have as many issues, nor do the ones produced after 2013.
Is a Ford 5.4 a good engine?
When it comes to powerful and capable engines, a V8 is about as good as it gets. And when you need a V8 with some serious horsepower and hauling capabilities, Ford’s 5.4L V8 can be a great choice.
What year is the best Ford 5.4 engine?
2009-2010 Triton 5.4L
With 300 horsepower and 365 lb-ft of torque, the Triton 5.4L is one of the most reliable F150 engines. Minor problems were still present like crank angle sensor issues and the occasional spark plug broken off in the head, but few repairs were as expensive as the previous years.
How long do 5.4 V8 Ford engines last?
We researched this popular engine from multiple professional sources, so you’ll know what to expect out of it. If properly maintained, the Ford 5.4 Triton engine will last between 150,000 and 300,000 miles. Getting to these mileage milestones will require you to: Regularly maintain the vehicle.
What years did the 5.4 Triton have problems? – Related Questions
When was the 5.4 discontinued?
Does Ford still make the 5.4 engine? Yes, and no. The engine, which was first produced in 1997, was used in the F-series through 2010.
What year did Ford stop making the 5.4 3 valve?
The last f150 with the 5.4 triton was built in 2010.
What year did Ford fix the spark plug problem?
For 2008, Ford redesigned the 3V cylinder head to use a new one-piece spark plug.
How much HP can a 5.4 make?
Naturally aspirated, the 5.4 put down 444 horsepower and 380 pound-feet of torque on the dyno. With 13 pounds of boost, the V8 went all the way up to 840 horsepower. With 14 pounds of boost it cranked out 885 ponies, and at 15.4 psi the modular motor laid down an astounding 935 horsepower.
How many horsepower is a 5.4 liter Ford engine?
Ford 5.4L Triton Engine – Specifications
| Metric |
Value |
| Compression ratio |
9.0:1 (2 valves) / 9.8:1 (3 valves) |
| Max power @ RPM |
550 @ 6,500 rpm |
| Max torque @ RPM |
500 lb-ft @ 3,750 rpm |
| Cylinder Head |
Cast aluminum |
What year is a 3 valve Ford engine?
The 3-valve SOHC 4.6 L with variable camshaft timing (VCT) first appeared in the redesigned 2005 Ford Mustang.
What year did Ford change the 5.4 Triton engine?
For the 2006 model year, a flex-fuel version of the 3-valve 5.4 L Triton V8 became available, and the SuperCrew model was made available with the 6.5′ box.
What year did the 5.4 2v come out?
Dating back to 1997, when Ford first installed the 2-valve 5.4L into the Ford F-150 pickup truck, this engine was marketed as a Triton V-8. The engine has a cast-iron engine block and aluminum cylinder heads, using a single-overhead cam (SOHC).
What does a 3 valve mean?
The 3 valve technology incorporates a total of three valves, two each of the inlets and one exhaust valve in the engine. Thus, it is different and better than one valve for each inlet & exhaust valve used in the conventional engine design. The engine uses its valves just like humans use a nose.
Why is 4 valves better than 2?
4 valves per cylinder allows for more airflow than 2 valves per cylinder, as there is larger open area when the valves are open. Having a configuration with DOHC and four valves per cylinder means better airflow, especially at high engine speeds, resulting in better top end power.
Which is better 3 valve or 2 valve?
In a nutshell, three or four-valve engines are generally better than their two valve counterparts and are more desirable if you don’t mind the extra cost.
Why are inline 4 engines unbalanced?
However, straight-four engines have a secondary imbalance. This is caused by the acceleration/deceleration of the pistons during the top half of the crankshaft rotation being greater than that of the pistons in the bottom half of the crankshaft rotation (because the connecting rods are not infinitely long).
What is the strongest inline 4 engine?
The M139 2.0-liter inline-four engine is used by several popular models by the German luxury brand. It also just happens to be the world’s most powerful four-cylinder engine in serial production. Powering the Mercedes-AMG CLA45 S, the M139 powerhouse produces 415 hp and 369 lb-ft of torque straight from the factory.
What is the most balanced engine?
The most naturally balanced engine in its basic state is an Inline-6 cylinder. Due to the timing of the pistons, the six cylinders move in pairs but fire on alternating cycles. This results in a uniform and constant gap between each cylinder movement.
What is the smoothest engine?
Straight-six
So what’s so special about the straight-six? Advantages: The straight-six is Inherently balanced. The layout combined with its firing order leads to essentially the smoothest engine out there.
Which engine gives more life?
There are two reasons for this. The first is that a diesel engine returns better fuel efficiency and the second one is that they last longer.