What years did the 5.4 Triton have problems? Based on my research, 5.4 Triton engines from vehicles manufactured between 2004 and 2013 seem to have the most problems. The earlier engines didn’t seem to have as many issues, nor do the ones produced after 2013.
What year did the 5.4 go to 3 valve?
When Ford introduced the single overhead cam 5.4L 3V Modular V-8 in 2004 in the redesigned F-Series trucks and the 4.6L 3V in the all-new ’05 Mustang GT, it was viewed as an upscale compromise between the 2V Modular and the mighty DOHC-4V Cobra and Mach 1 engines.
What year is the best Ford 5.4 engine?
2009-2010 Triton 5.4L
The 5.4-liter V8 improved in 2009, fixing the cam phaser issues and all but eliminating the spark plug problems. With 300 horsepower and 365 lb-ft of torque, the Triton 5.4L is one of the most reliable F150 engines.
Is the Ford 5.4 L V8 a good engine?
When it comes to powerful and capable engines, a V8 is about as good as it gets. And when you need a V8 with some serious horsepower and hauling capabilities, Ford’s 5.4L V8 can be a great choice. Still, every engine can run into trouble from time to time.
What years did the Ford 5.4 have problems? – Related Questions
What year did Ford fix the spark plug problem?
That original 2006 TSB has been updated several times, with the final one being TSB 08-7-6 (you can easily find it on the web). For 2008, Ford redesigned the 3V cylinder head to use a new one-piece spark plug.
How many miles will a 5.4 F 150 last?
The average Ford F150 will last between 150,000 and 300,000 miles. There are, of course, several factors that affect this lifespan—like your vehicle’s model year and what type of usage it’s seeing.
How much horsepower does a 5.4 Triton v8 have?
Ford 5.4L Triton Engine – Specifications
| Metric |
Value |
| Stroke |
106 mm |
| Compression ratio |
9.0:1 (2 valves) / 9.8:1 (3 valves) |
| Max power @ RPM |
550 @ 6,500 rpm |
| Max torque @ RPM |
500 lb-ft @ 3,750 rpm |
What was the last year Ford used the 5.4 Triton engine?
Does Ford still make the 5.4 engine? Yes, and no. The engine, which was first produced in 1997, was used in the F-series through 2010.
When did Ford stop making the 5.4 Triton?
The last f150 with the 5.4 triton was built in 2010. Good riddance, it had a lot of oil related issues.
Is the Ford 5.4 Triton a good motor?
Anyways, the 5.4L Triton is a pretty reliable engine. Keep up with maintenance and repairs as they pop up, and chances are the 5.4 V8 will hold up beyond 200,000 miles. There’s a reason Ford stuck with these engines for roughly 2 decades.
How do I know if my 5.4 Triton is 2 or 3 valve?
You could take off the rocker cover on one side and count the valve springs. If it is a 2 valver, you see 8 springs, and 12 if it is a 3 valve engine.
Which is better 3 valve or 4 valve?
3 Cylinder 12 valve engine has 4 valves per cylinder. 4 Cylinder 12 valve engine has 3 valves per cylinder and 4 Cylinder 18 Valve engine has 4 valves per cylinder. 4 Valve cylinder has higher performance with respect to power generated per cylinder and makes a better selection.
Which is better 2 valve or 4 valve?
4 valves per cylinder allows for more airflow than 2 valves per cylinder, as there is larger open area when the valves are open. Having a configuration with DOHC and four valves per cylinder means better airflow, especially at high engine speeds, resulting in better top end power.
Which is better 2 valve or 3 valve?
In a nutshell, three or four-valve engines are generally better than their two valve counterparts and are more desirable if you don’t mind the extra cost.
Are titanium or steel valves better?
“Steel valves are a great low-cost alternative to titanium,” Sulecki explains. “[They] offer longevity, reliability, and improved wear over titanium.
Is it better to have tight or loose valves?
If they are loose there is a metallic knocking sound, reduced power and excessive fuel consumption. If they are too tight then there is excessive load on their seats and the risk for the valves to burn out.
Which is the best valve?
Their products include:
- Check valves.
- Butterfly valves.
- Single & Double block bleed.
- API 6A Trunnion mounted ball valves.
- Hipps valvesHPHT globe valves, manufactured following API 6A.
- API 6A gate valves.
- ASPI 6A DBB valves.
- API 6A check valves.
Which valve is most often faulty?
Any valve in the heart can become diseased, but the aortic valve is most commonly affected. Diseased valves can become “leaky” where they don’t completely close; this is called regurgitation.
Is a cow or pig valve better?
Two papers demonstrated similar haemodynamic profiles in both valves. In conclusion, the bovine valve is superior in its complication and haemodynamic profiles. Both bovine and porcine valves have comparable results with regard to the mortality, postoperative functional status and valve durability.
What are the disadvantages of a valve replacement?
Possible risks of heart valve repair or replacement surgery include:
- Bleeding during or after the surgery.
- Blood clots that can cause heart attack, stroke, or lung problems.
- Infection.
- Pneumonia.
- Pancreatitis.
- Breathing problems.
- Arrhythmias (abnormal heart rhythms)
- The repaired or replaced valve doesn’t work correctly.