There are several reasons why your car’s cigarette lighter may not be working, but the most common are: an issue with the cigarette lighter socket, an issue with the charger/plug, or an obstruction inside the socket.
Use the fuse gripper tool included in the fuse box (or your fingers) to pull out the fuse. If the metal on the fuse looks broken or burned, it will need to be replaced. Buy a new fuse of the same amperage from your dealer or auto parts store and replace the bad fuse. Once installed, try the cigarette lighter again.
How do I fix a stuck cigarette lighter?
It is pretty easy to remove, so if it feels stuck, chances are it is still attached to the car. Check for a wire connector and rotate the socket clockwise until it loosens. If you can’t remove the socket and know that you cleared away any wires, use pliers to turn it until it loosens.
If your 12-volt socket stops working, one of the first things you should check on is the charger you are using with it. Most car chargers don’t come with fuses and surge protectors, this means that if the socket is overloaded then it could cause the charger to short circuit or burn out.
Why are my cigarette lighters not working? – Related Questions
Why would a socket suddenly stop working?
This occurs from wear and tear over time, which erodes the important wire insulation, allowing electricity to escape and short. Faulty appliance- sometimes plugging a faulty appliance into the socket can appear to have broken your socket completely. But usually this will just trigger a circuit breaker.
How much does it cost to fix a cigarette lighter?
The cost to fix a cigarette lighter in a car is between $50 and $100, depending on your vehicle. In most cases, it’s a simple problem with the socket or the fuse. It may be a wiring issue, which could be a little trickier (and more costly) to repair.
How can you tell if a 12v fuse is blown?
The blown fuse will be apparent because the wire element within will have melted or burned from the higher electrical current. You can also use a test light or a multimeter to identify the dead fuse without having to pull it out. Both tools are affordable and easy to use.
Why does my 12v socket keep blowing fuses?
There is a hard limit on the current that you can draw from a cigarette lighter socket or any 12-volt accessory socket. If the device that you want to power up via your cigarette lighter draws more amperage, then it’s a simple fact that the fuse will blow every time you plug it in.
Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
How do you fix a blown plug socket?
You can try fixing it quickly and easily with these few fixes that I will discuss below.
Replace The Outlet.
Replace Loose Or Damaged Wiring.
Unplug Everything And Plug Them Back In.
Get A New Fuse For The Circuit Breaker.
Reset The Circuit Breaker.
Use A Power Strip.
Can I replace a fuse myself?
Luckily, fixing a blown fuse is a relatively easy DIY home repair. All you need is some basic knowledge about your fuse box and a quick trip to the hardware store and you’ll be back in business. As always, abide by the proper safety measures when working with electricity.
How do you fix a fuse in a socket?
How do you fix a fuse that won’t turn on?
Unplug all of your appliances and try resetting the fuse switch. Once reset, plug your appliances back in one at a time and switch them back on. If the switch trips again, you’ll know it’s the last appliance that you plugged in and switched on. Turn off and unplug the appliance, before resetting the switch.
Can a blown fuse be reset?
Switch this breaker fully to the “off” position and then switch back over to “on”. Your power will now be restored! To test, plug a few things back in and turn them on to test your new fuse or reset breaker.
The most common cause of a blown fuse is when something draws too much power from the circuit. This is most often caused by either too many lights or from using too many plug-in appliances at once. The biggest culprit for this kind of issue is a multiple outlet adapter plugged into a socket.
How do you reset a fuse?
The tripped circuit breaker will be in the “off” position or in a middle position between “on” and “off.” Reset the Breaker: Move the breaker to the full “off” position and then back to “on.” That should clear an overload and return power to the room.
How do you tell if a fuse is burnt out?
Will a blown fuse work sometimes?
The answer, though it may surprise many, is a resounding YES.
What to do if fuse blows?
Fixing A Blown Fuse
In order to safely fix a blown fuse, unplug all appliances, devices and other items from the socket in the room where the fuse has blown.
Disconnect the power to the fuse box by shutting off the main power.
After you replace the fuse, restore electricity flow to the fuse box.