If there is power, and you have a good ground, you either need a new radio or the lead isn’t making good contact t the plug. If not, check for power ar the fuse. If there is power there, the wire is bad between the fuse and the radio. If not, you will have to go segment-by segment intill you find the broken wire.
If the touch screen going black issue is a random affair that pops up every now and then, it may be due to a bug in the Uconnect software. In that case, updating the software or getting the Uconnect firmware reinstalled might be the only solution to fix the touch screen not working on your Jeep vehicle.
Why does my car radio turn on but no sound?
Check each set of wires and speakers to be sure no wire or lead is connected to a chassis ground. The radio will see this as a short and turn off the internal amplifier causing the on but no sound issue. Each speaker connected to the radio needs dedicated positive and negative leads from the radio to each speaker.
Press the hot and coup up and down buttons simultaneously for at least five seconds.
Scroll through the menu that pops up and select the choice prompting you to reset factory defaults.
Once selecting this option, wait roughly 30 seconds while the system reboots.
Why did my Jeep radio stop working? – Related Questions
Why is my factory radio not working?
The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.
How do you do a hard reset on a radio?
Turn the radio off. Hold the radio power button down for a few minutes until it resets.
How do I restore the factory settings on my car?
How do I reset my Jeep infotainment system?
Uconnect® reset:
With the car in park, turn the ignition on to “Run.”
Simultaneously press and hold the volume knob and tuner knob at the same time for about 20 to 30 seconds.
If done correctly, the display will flash your vehicle’s brand and restart.
How do I reprogram my factory settings?
How to perform Factory Reset on Android smartphone?
Tap Settings.
Tap General & Backup and reset.
Tap Factory data reset.
Tap Reset device.
Tap Delete all.
How do you soft reset Jeep Uconnect?
For the latest Uconnect® version 8.4, this is how you can perform a soft reset of the system:
Turn your key in the ignition to “Run,” but leave the car in park.
Simultaneously press the volume button and the tuner knob at the same time.
Press and hold the tune knob and the volume button simultaneously. Hold the buttons for 15 seconds, and the screen will go off. The screen will again switch on, and at this point, the stereo system will reset.
What does a soft reset do?
To perform a soft reset, you power off your phone and turn it back on. Restarting your phone closes all the processes and apps running on your phone and loads all the system files from scratch. A soft reset does not come with the risk of losing your data.
Why is Uconnect not working?
First, confirm that your SXM Guardian or Uconnect Access subscription has not expired. Then, visit the app store for your phone and ensure that you have the most up-to-date app version downloaded; you may even want to delete and re-download the app as a precaution.
How long does Uconnect last?
Your membership for the one year will begin on the date of your order. You can purchase a membership to Uconnect Services for a price of $149.99 for a year.
How do you refresh Uconnect?
To update Uconnect, remove all SD cards and USB ports from your car and insert the drive.Set the ignition to Run.If you have a button starter, keep your foot off the brake and press the button twice to reach Run. A file will take a maximum of 15 minutes to upload.
How do I get my Uconnect to work in my Jeep?
To activate your service, follow these simple steps:
Press the Assist button. on your rearview mirror.
Press the activate button. on the Touchscreen, followed by the. Customer Care Button.
Speak with an agent who. will complete your activation.
If you have Uconnect® version 8.4, here’s how to perform a soft reset: With the car in park, turn the ignition on to “Run.” While doing this, simultaneously press and hold the volume knob and tuner knob at the same time for about 10 to 20 seconds.