Brake Pads Worn: A final brake-related BMW warning light symbol relates to your pads. It’s time to schedule service and get them replaced if you see a circle ringed by broken parentheses.
The warning means the sensor was tripped. Once tripped it must be replaced to do a reset. You also may need to clear the fault codes with an OBD diagnostic tool before a reset is possible. If you replace the sensor and try to reset and it still says “reset impossible” you’ll definitely need a scan tool.
Why is my brake light on in my BMW? – Related Questions
How do you reset the brake light on a BMW x5?
How do you reset the brake fluid light on a 2017 BMW x3?
How do I reset my BMW x3?
How do you reset the brake light on a 2017 BMW?
How do you reset the service interval on a BMW x3?
Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.
How do you reset the brake light on a 2020 BMW 330i?
Here’s How to Reset Your Brake Warning Light
Insert the key (or key fob) in the ignition. Move the key to position 2, but don’t start the ignition. Open the driver’s door and wait for approximately 10 seconds. After completing the above three steps, the brake pad lights should reset!
How do I reset my BMW 3 Series?
However, if you service your own vehicle but are unsure of how to reset the computer system, follow these steps below to assist you. Turn the key to the ON position without starting the vehicle.Press and HOLD the ODOMETER button for TEN seconds. It is located to the far bottom LEFT of the Instrument Cluster.
Turn on the vehicle’s electrical systems but do not start the engine.
Press and hold the small odometer button near the bottom left corner of the instrument panel until the service message appears.
Release the button, and press and hold it again until the message says “Reset?”.
How do you reset the brake light on a BMW e90?
How do I reset my BMW?
How do you clear a BMW check?
How do you reset the codes on a BMW?
How do you reset the red exclamation mark on a BMW?
Press in the end of the stalk to select.Press and hold for about 5 seconds and a tick should appear then just drive off and it will reset on the move.
Can I drive with check engine light on BMW?
A steady glow typically means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is needed immediately. If your check engine light is flashing in your BMW, we highly recommend not to drive the vehicle and schedule BMW service today.
Can AutoZone check engine light BMW?
AutoZone can diagnose Check Engine Light codes, yes.
Will BMW check engine light reset itself?
Since most BMW models use a Condition-Based Servicing system, your check engine light should reset itself automatically if and when the offending issue has been resolved.