Why is my Chevy Silverado touch screen not working?
by
Why is my Chevy Silverado screen not working? The radio screen in a Chevy Silverado 1500 vehicle will go out for several reasons – most commonly a blown fuse or maybe if you hit something and knocked a wire loose. It can also be due to a problem with the display itself, or a problem with the circuit board.
Are there any recalls on 2015 Chevy Silverado 1500?
Summary: General Motors LLC (GM) is recalling certain 2015-2016 GMC Sierra 1500, 2500, 3500, and Chevrolet Silverado 1500, 2500, and 3500 trucks. The roof-rail air bag (RRAB) inflator end cap may detach from the inflator, or the inflator sidewall may rupture.
Why is my GMC touch screen not working?
Check the Wires
The fuse might be fine but the problem could be as simple as a loose wire. Check the back of the fuse box to see if there are any damaged or loose wires. You may simply need to re-secure a wire to get the touch screen back up and running.
STEP 1: Locate the Body Control Module (BCM) located just under the dash on the driver’s side of the vehicle.
Why is my Chevy Silverado touch screen not working? – Related Questions
What are the symptoms of failing body control module?
How do I reset my TCM 2015 Silverado?
Luckily, resetting your transmission control module is pretty easy. How do you reset the transmission control module in your Chevy Silverado? Turn the key, press the gas, wait, turn the key off, release the gas, wait, and you’re ready to go. More often than not, this procedure is going to do the trick.
Where is the BCM module located?
How do you reset the BCM on a Chevy Silverado?
IF YOU DO NOT HAVE ACCESS TO THE TECH TERMINAL, A 30 MINUTE RELEARN PROCEDURE MUST BE PERFORMED BY FOLLOWING THESE STEPS:
PLACE A JUMP PACK ON THE VEHICLE.
TRY AND START THE VEHICLE.
RETURN THE KEY TO THE RUN POSITION.
WAIT 10 MINUTES.
TURN THE KEY FROM RUN TO OFF.
RETURN THE KEY BACK TO THE RUN POSITION.
Where is the BCM module?
In the vast majority of vehicles, the body control module can be found beneath the dashboard. This tends to be a fairly standardized location, with most modules of this type being located within close proximity to this area.
Where is the BCM fuse located?
How much does it cost to replace a BCM module?
The average cost for body control module replacement is between $572 and $601. Labor costs are estimated between $78 and $99 while parts are priced between $494 and $502. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
A BCM unit, which is also an ECU, acts as a gateway or hub in order to interact with different ECUs. This mitigates the need for cabled plug-in connection between ECUs within the vehicle.
Will a car run without BCM?
The short answer is yes, on some vehicles. A body control module (BCM) that isn’t properly receiving or transmitting signals can prevent certain vehicles from starting, depending on the system design.
How do I fix my body control module?
How to Repair a Body Control Module. Most of the time, a damaged BCM will have to be replaced and can’t be repaired. Water, vibration, heat and age can all contribute to a module failing, which, depending on the placement of the unit in your vehicle, can be difficult to avoid.
What causes lost communication with body control module?
Sometimes, during accidents, the BCM may be shocked or jarred due to impact, which could cause the module to stop working altogether. Other times, the wiring harness may be loose, exposed or cut. If a wire becomes exposed and comes in contact with another wire or piece of metal, this will cause a short to occur.
Can you just swap a BCM?
Re: Relpacement swap of BCM without dealer
you can reprogram the bcm but is dealer only to reprogram the keys . you will need to get the correct bcm with matching code as they are slightly different.
How much does it cost to reprogram BCM?
The average body control module repair costs
From what we researched, the costs ranged anywhere from as little as $450 to more than $1,200+. Most of the costs will greatly depend on your vehicle as the parts and the reprogramming will be the most expensive part of the process.