Why is my remote start not working on my Chevy Silverado?
by
Some reasons why remote start might not work is if the function is disabled if the hood is not closed, if the key fob is inside the car (to prevent you from locking yourself out), or if the hazard lights are on. Check these if you’re having any trouble.
How do you reset the remote start on a Chevy Silverado?
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.
Why is my Chevy remote start not working?
If your remote starter system isn’t working properly, try replacing the battery in your fob. You can find replacement key fob batteries at Batteries Plus. Most remote starter fobs run on 2032 lithium coin cell batteries. This one may seem obvious, but if your vehicle is not in “Park” your remote starter will not work.
Why is my remote start not working on my Chevy Silverado? – Related Questions
How do I reset my remote start?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
How do I reprogram my remote start?
How do I unlock my Chevy remote start?
About Keyless Open and Keyless Start
With the vehicle off, press and hold the Lock and Unlock buttons on the key fob for three seconds.
The turn signal lamps will flash two times to indicate Keyless Open is enabled.
Will a bad car battery cause a remote start not to work?
Cause: It is rare, but does happen – in most cases, this is caused by a dead battery in the vehicle or the battery having been disconnected when being serviced. Remote starters usually have some type of non-volatile memory to retain things like programming features and remote control codes.
Generally, you can expect anywhere from $150 to $500 for professional installation of a remote car starter.
How long does factory remote start last?
Once remote engine start has been initiated, the engine will stay running for 15 minutes before shutting off. Was this answer helpful?
Can remote starter be replaced?
We can replace nearly any remote or remote car starter fob. Keep scrolling down to find your exact Brand and model replacement remote. We specialize in Viper Canada, CompuSTAR, Starters, AutoStart, ProStart, and AstroStart remote car starters. If your desired replacement remote is not one of these brands.
How long do remote start batteries last?
Typically, a car fob battery should last between three and four years. Additionally, there are a number of signs that will tell you when your fob battery is dying. The first sign is reduced signal strength. Most modern fobs can send a signal to your vehicle from up to 50 feet away.
Does remote start mess up your starter?
False. Simply put, a remote start runs your engine the same way it runs when you start it with the key. When you allow your vehicle to warm up before driving away, the fluids in your engine will lubricate critical components better.
How much does it cost to program a remote starter key fob?
How much does it cost to program a key fob? Answer: Key fobs are typically programmed by a locksmith. The cost for programming a key fob typically ranges from $85 to $400. Key fobs, otherwise known as a remote fobs, are conventional for most automobiles these days.
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
Can AutoZone reprogram my key fob?
AutoZone provides a variety of key fobs that work for most vehicle makes, and they will help you match and program your fob to your car. Key fobs can range from $20 to $400 depending on the vehicle and the type of fob you buy.
Can I buy a new key fob and program it myself?
Can I program a key fob myself? Depending on the age and model of your car, you may be able to program a replacement yourself. The procedure for do-it-yourself key fob programming can vary: Some automakers provide instructions in their owner’s manuals. Information can be found in many cases on the internet.
How do I reset my Chevy key fob?
On the Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again. This indicates that you have successfully programmed the Chevy key fob. Re-insert the programmed key back into the ignition to the “On” position, ending the programming sequence.
How do I reprogram my key fob after replacing the battery?