The most common reasons a Chevrolet Silverado 1500 cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.
What could cause the cruise control to stop working?
If either the spiral cable, vacuum actuator, or vacuum hoses are faulty, the cruise control may stop working. If your car’s cruise control has suddenly stopped working, you should avoid using it until the problem can be diagnosed and repaired. You should bring your vehicle to a certified auto mechanic.
Is there a fuse for cruise control?
If your cruise control system is electronically controlled, it will have an associated fuse. If there’s an electrical problem, the fuse will fail in order to keep other wiring from getting damaged. Try replacing the fuse.
Why is my ADAPTIVE CRUISE CONTROL temporarily unavailable?
If any of the radars or the camera becomes blocked or misaligned, an “ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE” message may be displayed and the cruise will be disabled.
Why is my Silverado cruise control not working? – Related Questions
How do I reset my Adaptive Cruise Control?
In order to reset Honda’s ACC system, simply press and hold down the interval button (vehicle with four bars behind it) for approximately one second and Cruise Mode Selected will appear in the instrument panel. Press and hold the interval button again to reset the Adaptive Cruise Control feature.
Where is the Adaptive Cruise Control sensor located?
The Adaptive Cruise Control camera is located behind the windshield in front of the rearview mirror. It’s important to keep the windshield clean for the camera to work properly. On some vehicles, the feature also uses radar sensors located in the front grille or bumper. Keep these areas of the vehicle clean.
How do I fix ACC not available?
Normally that message is to do with it not getting a clear view from the radar sensor so make sure that there is no obstruction to the clear view and the radar sensor is free of any debris or moisture. Cleaning should resolve the problem and the warning message should go off.
What does ACC unavailable mean?
A yellow adaptive cruise control (ACC) is not available light means that action is required. Roadside assistance: 0800 777 192. The indicator lamp lights up yellow. The radar sensor is dirty.
ACC may automatically disengage and the driver will need to manually apply the brakes to slow the vehicle if: The front camera is blocked or visibility is reduced. The Traction Control System (TCS) or StabiliTrak/ESC system has activated or been disabled. There is a fault in the system.
What does ACC and Front Assist not available mean?
In that case usually your instrument cluster or infotainment screen will display a message “ACC and front assist no sensor view warning message” which means the ACC and front assist system of your car have been dropped out due to some reason and not function properly.
How do you clean an ACC sensor?
Why is my car saying front assist not available?
The radar sensor or camera window is dirty. Clean the radar sensor and windscreen. The view of the radar sensor or camera is impaired due to the weather conditions, e.g. snow, or due to detergent deposits or coatings. Clean the radar sensor and windscreen.
How do I activate my ACC system?
What is difference between cruise control and Adaptive Cruise Control?
Conventional Cruise Control can maintain a steady speed that you set. Adaptive cruise control (ACC) is an enhancement of conventional cruise control. ACC automatically adjusts the speed of your car to match the speed of the car in front of you. If the car ahead slows down, ACC can automatically match it.
Is the ACC the ignition switch?
The second position is the ACC/ACCESSORY position, which allows you to use your radio, windshield wipers, and other accessories while the engine is off. This position should also be used in the event that your vehicle is being pushed or towed. In this position, the engine is off.
Take your car for a spin and test each button, in turn, to ensure they are working accordingly:
The ON/OFF button: When you press the on button, a light should turn on in the dashboard.
The set/accelerate button: When functioning properly, this button should accelerate the speed of the vehicle in cruise control.
How do I know if my cruise control fuse is blown?
There are two places on the back side of each fuse to probe; if the test light does not light on both sides of the fuse you will find that the fuse is most likely blown. If the test light does not light on either side of the fuse; you will need to look in the owner’s manual to see what that circuit feeds.
How do you diagnose a bad cruise control switch?
One of most common symptoms of a problem with the cruise control switch is a cruise control light that will not illuminate. The light should be illuminated as soon as the cruise control system is switched on to notify the driver that the system is activated.
What sensor controls cruise control?
A radar sensor is usually at the core of the adaptive cruise control (ACC). Installed at the front of the vehicle, the system permanently monitors the road ahead. As long as the road ahead is clear, ACC maintains the speed set by the driver.
Does ABS sensor affect cruise control?
Hello there, the ABS and cruise control systems work together and any fault with the ABS will disable the cruise control. The most likely causes of the ABS light is an issue with the control module, ABS sensor, or low brake fluid.