The most common reasons a Volvo S60 key won’t turn are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.
What do I do if my key won’t turn in the ignition?
How do I unlock my Volvo xc90 steering wheel?
Deactivating the steering lock
The steering lock is deactivated when the car is unlocked from outside. If the car is not locked, the steering lock will deactivate if the remote control key is inside the passenger compartment and the car is started by turning the start knob clockwise to unlock the steering lock.
How do you unstick a stuck ignition?
Jiggling the key – Another easy method for removing a stuck key is to push down on the key cylinder with your left index finger while simultaneously jiggling the key with your right hand. This can loosen the grasp of the springs and pins located inside the cylinder and allow the key to slide out.
Why won’t my key turn in my Volvo? – Related Questions
What would cause ignition to lock up?
Most modern vehicles now have small moving parts inside the ignition switch of the vehicle. If any of these small moving parts become misaligned, this could cause the ignition switch to lock up. When this issue occurs, the most common repair would be to replace the ignition switch.
How much does it cost to fix key stuck in ignition?
The parts to fix an ignition switch will cost anywhere from around $75 to over $200. Where your costs land on that spectrum will depend on the type of vehicle you own and how common replacement parts are.
What is the best lubricant for car ignition?
Silicone spray or powdered graphite are the most easily found lubricants, or Master Lock 2300D or 2305 lock lubricant should help the lock work more smoothly.
How do you unfreeze an ignition key?
How do you fix a stuck ignition cylinder?
Can you spray WD40 in key ignition?
Yes, it’s perfectly safe to use. Despite what some of the doom-mongers are spouting on here. Yes there are better things to use but if WD40 is what you’ve got then just go ahead. Just don’t use too much and have a rag handy to catch any run-off.
What is the best lubricant for key locks?
The best type of lubrication for a lock is a dry lube—such as Teflon (PTFE) or graphite. These types of lubricants repel dust and dirt and keep your lock from building up a gunky and sticky mess.
Before you accidentally break your key inside your lock, try one of these easy lubrication options to fix your problem.
Teflon Dry Lubricant.
Teflon Aerosol Lubricant.
Powdered Dry Graphite.
Graphited Lock Fluid.
Pencil.
WD-40 Specialist Lubricant.
De-Icer and Lubricant.
Non-Toxic Mineral-Based Lubricant.
What is the wd40 trick?
What is the one WD-40 trick everyone should know?
How long does it take for WD-40 to kick in?
All you need to do is soak the screw with the WD-40 Specialist Penetrant spray and let it work its magic for about fifteen minutes or so. The WD-40 Specialist Penetrant spray will loosen the screw enough for you to remove it with ease with a screwdriver in your hand.
What does spraying WD-40 in your gas tank do?
According to them, it’s useful as a fuel, lube, gunk remover, and scratch remover. Okay, maybe not so much as a fuel. After draining a gas tank and filling it with WD40, the engine dies pretty quickly, despite the fact that WD40 is a flammable substance.
Why put toothpaste in gas tank?
They don’t. They are “pulling your leg”, or trying to trick you into trying it, only for you to have a very expensive repair bill down the road to remove the toothpaste from your tank and engine. There is no reason whatsoever to put ANYTHING into your gas tank besides gas.
When should you not use WD-40?
But Don’t Spray It On:
Door hinges. Sure, WD-40 will stop the squeaking, but it also attracts dust and dirt.
Bike chains. WD-40 can cause dirt and dust to stick to a chain.
Paintball guns. WD-40 can melt the seals in the guns.