You can update the maps in your SYNC 3 navigation system by downloading the latest software online or purchasing a preloaded flash drive from the SYNC 3 navigation website. Note: The engine must be running until the installation is complete. The estimated time for the update is about 60 minutes.
The newest version of Ford’s infotainment system is Sync 4. Ford is slowly inputting Sync 4 into new vehicles. The vehicles that currently have Sync 4 installed are the 2021 Ford Mustang Mach-E, the 2021 Ford F-150, the 2021 Ford Bronco, and the 2021 Lincoln Nautilus.
How do I know if my Ford Sync needs to be updated?
You can see if there is a SYNC update available for your vehicle by going to the Ford Owner Support site.
Enter your Vehicle Identification Number (VIN) and select Check for update.
Select the SYNC UPDATE AVAILABLE drop-down.
Does Ford Sync automatically update?
Update SYNC 3 via Wi-Fi
Once connected, go back to the Settings screen and select the “General” button. On the General Settings screen, tap the “Automatic System Updates” bar. Tap the “Automatic System Updates” slider to turn them on. A confirmation message will then appear: “Automatic System Updates: On.” Press Close.
Can I upgrade Ford Sync navigation? – Related Questions
How do I update my Ford maps for free?
Visit the SYNC and Navigation update page. Enter your Vehicle Identification Number (VIN) and select Check for Update. Select the drop-down under Navigation Updates and follow the instructions.
How much is a Ford software update?
Is there a fee to download SYNC®* updates? SYNC updates are free to download via Wi-Fi (SYNC 3 and SYNC 4 & SYNC 4A only) or by using a USB drive. Visit the SYNC and Navigation Update page to see if you have SYNC or Navigation updates available for your vehicle. You may also visit your local Ford Dealer for assistance.
Does SYNC 3 update automatically?
Make sure the “Automatic System Updates” is “On” by tapping on the slider. A prompt will appear letting you know that “Automatic System Updates are On” and the process is complete. From there, your SYNC® 3 system will automatically update itself when connected to a trusted Wi-Fi network.
How long does it take for Ford Sync to update?
Once the update begins, you can then drive your vehicle. Remove all other USB drives from your car and insert the flash drive that contains the updated SYNC software into your vehicle’s USB port. The update will automatically begin and it should take approximately 30 – 35 minutes.
Turn on your vehicle as power must remain stable during the update.
Plug the USB drive into USB port in the vehicle.
Press Menu.
Scroll to SYNC-Settings.
Press OK.
Scroll to Install on SYNC and press OK.
Select Yes to the prompt that appears on your screen.
How do I update my SYNC software?
Log in to your SYNC Owner account.Visit the SYNC Software Updates page.If you see a notification that says, “You have recently downloaded an update,” choose Confirm Update.
Can I update SYNC myself?
How do I install SYNC®* updates using a USB? Visit the SYNC and Navigation Update page.Enter your Vehicle Identification Number (VIN) and select Check for update.Select the drop-down under SYNC UPDATES.
How do I tell what version of Ford SYNC I have?
One of the easiest ways to tell what version of SYNC you have is to look at your center console. Click on the SYNC setup below that looks closest to what’s in your vehicle to see the included features. Or, just keep scrolling for a full run-down.
How do I update my Ford Sync USB?
How do I update my Ford maps via USB?
How do I install SD card in Ford navigation?
What does Master Reset do on Ford SYNC?
Scroll down and press Master Reset. A message confirming that all system settings will be erased and reset to factory defaults will appear.
Will disconnecting battery reset Ford Sync?
To perform a Hard Reset: With the ignition OFF, disconnect the power to the SYNC module buy either disconnecting the vehicle battery or the large 54 pin connector at the back of the module.Reconnect the power after 30 seconds.
