How many miles can you get on a General Grabber ATX?

Which is why, when General equipped the ATX with a treadwear warranty of up to 60,000 miles, most off-roaders immediately knew that this tire won’t go away too easily. One of the reasons why it lasts longer than most of its competitors is the DuraGen Technology of this tire.

What does ATX mean on tires?

The Grabber™ A/TX is an aggressive, all-season all-terrain tire for light trucks and SUVs. Designed to balance exceptional off-road capability with on-road performance and aggressive styling, this tire comes complete with Duragen Technology, which provides robust strength and durability.

RELATED READING  What size tire fits a 2008 Honda Odyssey?

What PSI should General Grabber tires be?

The Generals Grabber X3 tires are rated to run at 50 psi maximum, so we’re well below that pressure. Depending on your specific tires, wheel size, and vehicle weight, your starting highway pressure is probably higher than ours.

How many miles can you get on a General Grabber ATX? – Related Questions

Is 40 psi too high for truck tires?

In most of these cases, 40 psi should be more than enough, and since most modern tire designs will allow up to 44 psi (in some cases more) this is not a problem. If you have a heavily loaded vehicle, up to 44 or even higher is ok if the tire allows it, but this is a little high for most vehicles.

How long do General Grabber ATX tires last?

For those of us with large amounts of highway miles in between our off-road stints, General’s tread life improvements are backed by a 60,000-mile (excludes LT and flotation sizes) and 50,000-mile (includes LT and flotation sizes) limited treadwear warranty.

Are Grabber tyres noisy?

Latest Tyre Test Results

Positive – Low noise level. Negative – Very poor wet grip, high risk of aquaplaning, long stability and long braking distances in the snow.

Is there a recall on General Grabber tires?

Continental Tire the Americas has issued a voluntary safety recall for 325 of its General branded Grabber light truck tires in the U.S. market. Continental Tire the Americas has issued a voluntary safety recall for 325 of its General branded Grabber light truck tires in the U.S. market.

RELATED READING  Is Ironman a good tire?

How many ply is the General Grabber ATX?

The A/TX includes the Grabber X3’s 3-ply sidewall construction, which creates an additional level of puncture protection.

What PSI should drag slicks be?

“With flexible sidewall drag slicks, the normal pressure range is 4-12 PSI. Check with your tire supplier and talk to some successful racers in your class to find a good starting point.”

How much psi should a skid steer tire have?

Skid steer tire pressure specifications range from 45-60 PSI. Again, check the manufacturer’s manual for optimal tire pressure.

Is 38 psi too high for truck tires?

For instance, if 35 psi is recommended, and the maximum safe pressure listed on your sidewall is 44 psi, you can safely put 38 or 40 psi in your tires. You can even go to 44 psi. You’ll experience a harder ride, but you won’t create a blowout danger. You may even experience sharper cornering and increased fuel economy.

Is 37 psi tire pressure too high?

Most passenger cars’ psi requirement will be between 30 to 35 psi, but several vehicles fall outside of that range and every vehicle will have specific requirements. Good tire air pressure ensures that tires wear evenly, provide a smooth ride, and increase fuel efficiency.

Why do dealers overinflate tires?

Tires are overinflated during the shipping process, so as to help prevent the flat spot from forming in the tire as it sits for days on in during the shipping process. It is supposed to be part of the delivery check process that the service department deflates the tires to the proper pressure.

Is it OK for your tire pressure to be 40 psi?

Specifically, the level of 40 psi can be suitable for passenger cars or sports cars. But this is too high for small cars with a recommendation below 35 psi, while 40 psi is too low for large trucks. The recommended level for the tires of famous sports cars and passenger cars is between 32 -40 psi.

Is it better to over inflate or Underinflate tires?

If your car is underinflated, then it is going to feel sluggish. Underinflation will also lower the fuel economy of your car and shorten the lifespan of a tire. Overinflating a tire will also shorten its lifespan. The car will also handle more poorly because less of the tire is in contact with the road.

What is the best tire pressure for highway driving?

As a general rule, the ideal tire pressure is between 30 and 35 PSI (pounds per square inch), but not all cars are alike.

Leave a Comment