How much oil does a Nissan NV 3500 take?

Should I use 0W or 5W?

The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application. **Offers same protection as 5W but also provides faster flow and better fuel economy.

Do I need 5w20 or 5w30?

5w 30 oil is ideal for drivers in warmer areas. It has a higher viscosity index and a warmer temperature range than 5w 20 oil. 5w 30 oil is preferable in cold and hot weather. 5w 20 is suitable for chilly areas.

What kind of oil does a 4.3 V6 take?

The 4.3-liter V6 engine on this year’s Silverado uses SAE 5W-30 viscosity grade motor oil.

Does Nissan require synthetic oil?

Nissan vehicles built in the last couple years come with an owner’s manual saying that synthetic oil is recommended while older models say conventional oil is ok.

Is 5W 40 better than 5w30?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

Can I use 5w30 instead of 5W?

If you use 5w30 oil instead of 5w20 when it is not recommended or approved by your owner’s manual, it can void your car’s powertrain warranty, reduce engine efficiency, and possibly even damage your engine in the long run.

What happens if you put 10W oil in a 5W engine?

Using 10W-30 instead of 5W-30, however, could make cold starts more difficult. It’s helpful to think of the “W” as standing for “winter.” The lower the oil’s “W” viscosity, the more readily it will flow when cold. In this case, 5W-30 will flow more easily at startup than 10W-30.

Is 5w30 thicker than 5w30?

The higher the number, the greater the oil’s resistance to flow and the higher its viscosity. The second number (“30”) indicates the oil’s viscosity at normal operating temperature, which is 100°C (212°F). Higher numbers indicate the oil will remain thicker when hot.

Is 5w30 OK in hot weather?

When should I use 5w30 oil? You should always use the oil recommended by your vehicle’s manufacturer. However, 5w30 oil can function in temperatures as low as -30ºC and as high as 35ºC, making it an ideal choice if you drive your car in a place with relatively high seasonal temperature variations.

How long will 5W30 last?

Answer: If your car uses conventional motor oil, such as 5W30 or 10W30, we recommend changing the oil every 3,000 miles or 3 months. If your car uses synthetic oil, we recommend an oil change every 5,000 miles or 6 months.

Does thicker oil run hotter?

So does that mean as the oil gets hotter, it gets thicker? Nope – other way around! Motor oil gets thinner as it’s heated, but to prevent it from getting too thin at higher temperatures, additives (viscosity modifiers) are used so that it behaves like a thicker grade oil at higher temps.

Which engine oil is best for high temperatures?

Mobil 1 advanced synthetic motor oil provides outstanding high-temperature performance and is proven to protect at engine temperatures up to 500 degrees Fahrenheit.

Is 20w50 good for hot weather?

It is a known fact that oil tends to get thicker in colder climates and get thinner in the warmer weather. Thus, a viscous oil like the 20W-50 is suitable for warm climates. Furthermore, this grade of oil should be used in cars or vehicles that are subject to hot temperatures and are used for high stress activities.

Is 10W30 or 10W40 better for hot weather?

High Operating Temperature Or Warm Weather

10W30 oil and 10W40 perform the same at cold temperature startups. However, 10W-40 engine oil is more viscous in hotter climates and has a better temperature spectrum.

Should I use thicker oil in an older engine?

Many older, high mileage engines might face issues with oil pressure due to age and wear and tear. In this case, a practical method to improve oil pressure is to use a thicker oil, since the thicker oils have heavier base weight oil, which can help protect worn engine bearings well.

Which oil is best for high mileage engines?