How to Reset 2013 Toyota Highlander Maintenance Light: Step-By-Step Guide

Ever wondered how to reset that pesky maintenance light on your 2013 Toyota Highlander? Picture this: you’re cruising down the road, enjoying the drive, when suddenly that little light pops up, disrupting your zen. But fret not, because in this article, I’ll show you the simple steps to reset it yourself.

Overview of the Maintenance Light

When it comes to resetting the maintenance light on your 2013 Toyota Highlander, understanding why it comes on in the first place is key. The maintenance light is a helpful reminder that alerts you when your vehicle is due for routine service.

  • Regular maintenance schedules
  • Low engine oil pressure
  • Issues with the oil level

By knowing the potential triggers, you can take the necessary steps to resolve the issue promptly. Next, let’s dive into the simple steps to reset the maintenance light on your 2013 Toyota Highlander.

Step 1: Prepare Your Toyota Highlander

When resetting the maintenance light on your 2013 Toyota Highlander, the first step is to ensure that you have everything you need in place. Here are some key tips to help you prepare your vehicle effectively:

  • Gather Your Tools: Start by locating the trip reset button on the dashboard of your Toyota Highlander.
  • Check Your Environment: Find a safe and well-lit area to work on your vehicle, ensuring that you have enough space to move comfortably.
  • Turn Off the Engine: Before beginning the reset process, make sure your Toyota Highlander’s engine is turned off to prevent any mishaps.
RELATED READING  How to Test Toyota Sienna Key Fob Functionality: A Step-by-Step Guide

By taking these initial steps, you set yourself up for a smooth experience when resetting the maintenance light on your Toyota Highlander.

Step 2: Locate the Reset Button

When preparing to reset the maintenance light on your 2013 Toyota Highlander, the next step is finding the reset button. This button is typically located right on the dashboard and is often labeled as such. It might be near the odometer or in a different visible area inside the car.

To locate the reset button efficiently, sit in the driver’s seat and take a moment to familiarize yourself with the dashboard layout. Look for any buttons or controls that seem out of place or specifically related to resetting maintenance lights.

Once you’ve identified the reset button, you’re one step closer to successfully resetting the maintenance light on your Toyota Highlander. Remember, each car model may have a slightly different dashboard design, so take your time to pinpoint the exact location of the reset button.

Step 3: Press and Hold the Reset Button

It’s time to press and hold the reset button. Find this button located next to your Toyota Highlander’s odometer display. Once you locate it, firmly press it and hold it down for 10-15 seconds.

This action will prompt the maintenance light to start flashing. Keep holding the button until the flashing stops, indicating that the reset process is complete. After this, release the button.

Press and hold the reset button for the specified duration.

Step 4: Confirm Reset

After performing the reset process, it’s essential to confirm that the maintenance light has been successfully reset. Here’s how you can do it:

  • Start the Engine: Turn on your 2013 Toyota Highlander’s engine to see if the maintenance light stays off.
  • Check for Illumination: Observe the instrument panel to ensure that the maintenance light does not illuminate again.
  • Drive a Short Distance: Take your vehicle for a brief drive to see if the light remains off during operation.
  • Monitor for Reappearance: Keep an eye on the dashboard while driving to confirm that the maintenance light does not reappear.
RELATED READING  Discover the Best Year for Toyota RAV4 Interior Comfort and Design

It’s crucial to verify the reset to ensure that the maintenance light issue has been addressed effectively. By following these steps, you can confirm that the reset process was successful, providing you with peace of mind regarding your Toyota Highlander’s maintenance status.


That’s it! Following these steps will help you reset the maintenance light on your 2013 Toyota Highlander. Remember to confirm the reset by starting the engine, checking for the light, driving a short distance, and keeping an eye out for any reappearance. Verifying the reset ensures that your maintenance light issue is resolved, giving you peace of mind about your vehicle’s maintenance status. Drive safely!

Frequently Asked Questions

How do I confirm the successful reset of the maintenance light on my 2013 Toyota Highlander?

To confirm the successful reset, start the engine, check if the maintenance light illuminates, drive a short distance, and monitor for any reappearance of the light. This ensures that the maintenance light reset was effective.

About the author

My latest articles

Born to American parents but raised in London, Scott has always be fond of American cars. Jeep, Chrysler, Chevrolet and Dodge are among the card brand that's always been close to Scott's hearth.

RELATED READING  Exploring Catalytic Converters in Toyota Tundra: Facts & Maintenance Tips

Thus it's no surprise that you can find a Jeep Wrangler 4XE as well as a 2022 Dodge Challenger in his garage.

Leave a Comment