Step-by-Step Guide: Resetting Tire Pressure Light on 2016 Toyota Corolla

Ever been cruising down the road, only to have that pesky tire pressure light pop up on your dashboard like an uninvited guest? You’re not alone. It’s a common issue that can be a real buzzkill during your drive. But fret not, resetting the tire pressure light on your 2016 Toyota Corolla is easier than you might think.

Check Tire Pressure

To reset the tire pressure light on your 2016 Toyota Corolla, it’s essential to start by checking your tire pressure. Follow these simple steps to ensure accurate readings and a successful reset:

  • Use a tire pressure gauge to measure the air pressure in each tire.
  • Consult your vehicle manual for the recommended tire pressure levels.
  • Inspect all four tires, including the spare, as they all affect the system.

Remember, maintaining the correct tire pressure not only helps with the tire pressure light but also ensures optimal fuel efficiency and tire longevity.

Key Points Data
Recommended Tire Pressure 32 PSI
Benefits of Correct Tire Pressure Improved fuel efficiency, Longer tire lifespan

Locate the Reset Button

When resetting the tire pressure light on your 2016 Toyota Corolla, the first step is to find the reset button. Here’s how you can locate it:

  • Check the dashboard: Look for a button labeled “Set” or “Reset.” It is often located near the steering wheel or on the instrument panel.
  • Refer to the owner’s manual: If you’re having trouble locating the reset button, the owner’s manual can provide specific guidance on its exact location.
  • Inspect the center console: In some models, the reset button might be found in the center console area, near the climate controls.
RELATED READING  How fast is the Arrma Kraton 8S?

Now that you’ve found the reset button, let’s move on to the next step in resetting the tire pressure light on your Toyota Corolla.

Press and Hold the Reset Button

When you’ve located the reset button in your 2016 Toyota Corolla, it’s time to reset the tire pressure light. Follow these steps to complete the process smoothly:

  • Sit in the driver’s seat: Make sure the vehicle is parked safely with the engine off.
  • Identify the reset button: Once you’ve found the reset button, typically located near the steering wheel or on the center console, it’s time to press and hold it.
  • Turn the ignition key: You may need to turn the key to the “On” position without starting the engine. Keep an eye on the dashboard for any changes.
  • Hold the button: Press and hold the reset button for a few seconds until you see the tire pressure light blink a few times or receive a confirmation on the dashboard.
  • Release the button: Once you’ve held the button long enough, release it.
  • Check the light: Start the car and see if the tire pressure light is no longer illuminated. If it’s turned off, you’ve successfully reset it.
  • Monitor the light: It’s a good idea to keep an eye on the tire pressure light in the following days to ensure it doesn’t come back on, indicating any ongoing issues.

Remember, always refer to your owner’s manual for specific instructions tailored to your vehicle.

Wait for the Light to Blink

Once you’ve pressed the reset button and turned the key to the “On” position, be patient. The tire pressure light on your dashboard will start blinking. This process might only take a few seconds, but make sure you keep a close eye on it.

RELATED READING  What equipment do you need to wash a car?

The blinking light is a sign that the system is resetting. It’s crucial to wait until the light stops blinking or a confirmation message appears on the dashboard. This step ensures that the tire pressure monitoring system recognizes the reset command.

Avoid rushing this process; rushing could interrupt the reset and leave the light still illuminated. Remember, allowing the system to finish its cycle properly is key to successfully resetting the tire pressure light in your 2016 Toyota Corolla.

Verify Light is Reset

When completing the tire pressure light reset on your 2016 Toyota Corolla, check the dashboard for any remaining illuminated tire pressure warning indicators. Confirm that the light has turned off before assuming the reset was successful.

If the light remains on, repeat the reset process to ensure it has been properly activated.

Remember, it’s crucial to verify that the tire pressure light is indeed reset to avoid potential safety issues while driving.

Important Tips:

  • Double-check the dashboard indicators after completing the reset.
  • Consult your vehicle manual for troubleshooting guidance if the light persists.
Step Action
Step 1 Press reset button
Step 2 Turn key to “On” position
Step 3 Wait for blinking light to stop
Step 4 Ensure light is off after reset


Ensuring your tire pressure light is reset in your 2016 Toyota Corolla is vital for safe driving. Remember to double-check the dashboard indicators after resetting and consult your vehicle manual if needed. By following the step-by-step guide provided, you can easily reset the tire pressure light and avoid any potential safety concerns on the road. Stay proactive in maintaining your vehicle’s tire pressure to ensure a smooth and safe driving experience.


Frequently Asked Questions

How can I ensure that the tire pressure light is successfully reset in my 2016 Toyota Corolla?

To verify successful reset, check for any remaining illuminated indicators on the dashboard. If the light persists, repeat the reset process to avoid safety concerns while driving.

Can you provide a step-by-step guide for resetting the tire pressure light?

  1. Start the car and locate the TPMS reset button under the steering wheel.
  2. Press and hold the button until the light blinks three times.
  3. Release the button and start driving to allow the system to reset automatically.

What should I do if the tire pressure light remains on after resetting?

Double-check dashboard indicators for other issues. Consult the vehicle manual for troubleshooting steps if the light continues to illuminate.

About the author

My latest articles

Born to American parents but raised in London, Scott has always be fond of American cars. Jeep, Chrysler, Chevrolet and Dodge are among the card brand that's always been close to Scott's hearth.

Thus it's no surprise that you can find a Jeep Wrangler 4XE as well as a 2022 Dodge Challenger in his garage.

Leave a Comment