What are the symptoms of a failing fuel pump?

Is My Fuel Pump Going Bad? Here Are 8 Signs It Is!
  • Fuel Tank Noise. A damaged fuel pump might make a loud, whining sound that you’ll hear from your gas tank.
  • Difficult Starts.
  • Sputtering Engine.
  • The Actual Stall.
  • Power Loss.
  • Surging Power.
  • Lower Fuel Efficiency.
  • Dead Engine.

What are common problems with 2012 Chevy Traverse?

Problems with the Traverse are fairly serious including engine issues, air conditioning failures, and traction control system faults.
  • A loss of engine power while driving is the most common complaint showing up at 100,000 miles.
  • Air conditioning compressor failures show up regularly at around 105,000 miles.

What are the symptoms of a failing fuel pump? – Related Questions

Are there any recalls on a Chevy Traverse 2012?

The side curtain air bags may not be properly attached. Unsecured side curtain air bags may not perform as intended, increasing the risk of injury. GM will notify owners, and dealers will inspect and, if necessary, realign or replace the weld nuts, free of charge. The recall is expected to begin May 24, 2021.

Why is my traverse so bouncy?

If the rack bushings become either too loose or too stiff (such as if they get stuck), your car will sway or bounce. Other damage to the steering linkage can cause this problem as well, though the rack bushings are the most common culprit.

What year Chevy Traverse had transmission problems?

After the first Chevy Transverse was released in 2009, later alterations were done and by 2018, some of the problems experienced in 2009 were fixed. Transmission failure is one of those problems. The 2009 Traverse owners had complained their SUVs limped down the road and they experienced the issue at 88,000 miles.

How many miles can you get on a 2012 Chevy Traverse?

You can expect a Chevrolet Traverse to last 200,000 miles. If you drive 15,000 miles per year like the average American driver, that translates to 13.5 years of problem-free performance before you need to carry out major repairs on the vehicle.

RELATED READING  Is soundproofing your car worth it?

How much does it cost to change a timing chain on a 2012 Traverse?

The Best in Auto Repair

The average cost for a Chevrolet Traverse timing chain and gear set replacement is between $2,080 and $2,418. Labor costs are estimated between $1,296 and $1,635 while parts are priced at $783.

What year Traverse has timing chain Problems?

The overall problem occurred with 2007-2009 GM SUVs, including the 2009 Chevy Traverse and similar vehicles with 2.8L and 3.6L dual overhead cam engines. Chevrolet initially believed the timing chain wear was happening because the engine computer wasn’t sending them in for oil changes often enough.

Where is the fuel filter on a 2012 Traverse?

The fuel filter is always going to be found between the fuel tank and the engine. For most vehicles, the fuel filter is located inside the top of the fuel tank, right where it connects with the fuel line, although on some cars if might be elsewhere along the fuel line.

What are the symptoms of a worn out timing chain?

Signs of a Faulty Timing Chain
  • Rattling Sound on Starting the Engine or Idling. A common finding in a vehicle with a bad timing chain is unusual rattling noise when the engine is started or when brakes are engaged.
  • Misfiring Engine.
  • Contaminated Engine Oil.
  • Check Engine Light.
  • Inability to Start the Engine.

Does a 2012 Traverse have a timing belt or chain?

Newer models use timing belts made of polyurethane and Kevlar for long life and durability. They can go as long as 100,000 miles although it’s always a good idea to change it before then. Belt failure can cause extensive damage to the valves, pistons and other internal parts of the engine.

RELATED READING  Which air inflator is best for car?

Which Traverse is better LS or LT?

As we mentioned, the LT trim option is a step above the LS, so you’ll see some additional features and available add-ons. Below, you can find a list of all the special features of the Traverse LT that aren’t standard on the Traverse LS. Technology features include (in addition to LS features):

What does it mean when the check engine light is blinking on a 2012 Traverse?

If the check engine light in your Chevy Traverse starts flashing, that means that the problem needs immediate attention and your Chevy should be delivered in abruptly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

What does code P0008 mean on a Traverse?

What Does the Code P0008 Mean? P0008 is the result of a test run by the engine control module to check for misalignment between the camshafts in engine bank one and the crankshaft. The misalignment for this code would be at an idler sprocket in the bank or at the crankshaft.

Is code P0008 serious?

More serious problems associated with a P0008 code may result in an engine that runs roughly overall, and you might hear a rattling noise from the engine that could be the timing chain. In some cases, especially with serious and extended problems, you may even see the car refuse to start entirely.

Leave a Comment