What does service tire monitor system mean on a Chevy Equinox?

A Chevy “service tire monitor system” warning can mean one of two things. The first is that your tire pressure is suboptimal and requires adjusting to manufacturer-recommended levels. The second meaning applies if the warning does not go away after filling the tires or if a flashing TPMS light accompanies it.

What does it mean when my car says service tire monitor system?

Service Tire Monitor System: Basic Definition. A service tire pressure monitoring system (TPMS) keeps track of how much air is in your tires. If the system thinks your tires are not properly inflated, it will flash a warning light on your dashboard.

RELATED READING  What does a 265 tire equal to?

How do you reset the tire pressure sensor on a 2016 Equinox?

Turn your vehicle’s key to the “On” position without starting the vehicle. Push the TPMS reset button until the tire pressure light flashes three times, then let go. Start the car and wait for about 20 minutes for the tire pressure sensor to refresh.

How do I fix my service tire monitor?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and let it run for 20 minutes, which allows the sensors to reset. You’ll find the tire pressure monitor reset button located beneath the steering wheel.

What does service tire monitor system mean on a Chevy Equinox? – Related Questions

How much does it cost to fix a tire monitor system?

TPMS Replacement Costs and What to Expect

In the event TPMS sensors need to be replaced, the cost can range from approximately $50-$100 each depending on vehicle type.

How much does it cost to service tire monitor system?

The Best in Auto Repair

The average cost for TPMS sensor replacement is between $210 and $254. Labor costs are estimated between $55 and $69 while parts are priced between $155 and $185. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

What happens if you don’t replace TPMS sensors?

For any motorists that swap their tires out for changing seasons, it’s crucial that the TPMS sensors are reactivated and recalibrated each time. If this is not done, the vehicle’s TPMS will not perform properly and may cause the TPMS light to turn on.

How do I know which TPMS sensor is bad?

Where is the tire monitor reset button?

The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.

Why is my tire pressure monitoring system not working?

If you are unable to read the sensor, you may need to update your TPMS tool. The latest TPMS software will include the latest vehicle and TPMS sensor coverage, so be sure to perform a TPMS update. Check your tool under the SETTINGS menu for the latest software update and compare it to the latest update notes online.

Is there a way to disable tire pressure monitoring system?

Yes, there is a sophisticated yet non-invasive method of disabling your tire pressure monitoring system. All you have to do is use an emulator designed to bypass the TPMS. The TPMS bypass emulator is a small box-like device equipped with technology to “turn off” your tire pressure monitoring system.

How do I know if my tire pressure sensor is broken?

After starting a vehicle, a TPMS icon will turn on for a few seconds; however, if it stays on, it indicates that one or more of the tires on the vehicle are at least 25% below the recommended pressure. If the light flashes for approximately one to two minutes, it indicates there is a malfunction in the TPMS system.

RELATED READING  How do you make homemade RC tire prep?

How much does it cost to replace a faulty tire pressure sensor?

On average, you will have to spend between $30 to $75 for a sensor and around $10 to $35 in labor costs. Thus, the average cost of replacing a tire sensor can cost between $40 and $100.

Can I drive with a broken TPMS sensor?

If you don’t replace your faulty tire pressure sensor, you run the risk of driving over something and puncturing your tire. If this happens, it may be difficult to tell that you have a flat because the low air pressure warning should have already been triggered but is not being displayed on your dashboard.

Is it safe to drive a car with tire pressure sensor fault?

No, driving with the TPMS Light on is not safe. It means one of your tires is underinflated or overinflated. You can find the proper tire pressure for your car in your owner’s manual, or on a sticker located on the door, trunk, or fuel door.

Why does my car say low tire pressure but tires are fine?

Air Loss Due to Physical Impacts

Other common reasons for air leakage which can cause the low tire pressure light but tires are fine issue include damage to the wheel rim due to physical shocks on the road like flying pebbles or debris, or a faulty tire valve that bleeds air gradually.

How long can I drive with TPMS light on?

If the tire pressure is nominal and there are no leaks, but the TPMS warning light is still on, you could attempt driving for at least 10 minutes at over 30mph to warm the car up and wait for the warning light to turn off.

Leave a Comment