Restraint systems in BMW are designed to ensure the safety of the vehicle occupants in the event of a car accident. This system reduces impact during a collision by absorbing and decreasing a crashing vehicle’s force and secures the passenger to reduce the accident’s impact.
If the restraint system is malfunctioning, restraint system components may be triggered unintentionally or may not deploy as intended during an accident. This may affect the seat belt tensioner or airbag, for example. Have the restraint system checked and repaired immediately at a qualified specialist workshop.
What does driver restraint system mean?
During a collision, a vehicle will rapidly change direction and/or speed. During this “crash pulse”, occupants will continue moving at the pre-impact direction and speed. The purpose of restraint systems are to: Slow the occupant over the longest possible time. Distribute the crash forces over the largest area possible.
Why does my car keep saying safety restraint system?
The SRS light refers to the entire Supplemental Restraint System. This means that the seat belts may also cause the light to illuminate. While making sure everyone is buckled in may solve the problem, it could also be caused by a seat belt switch that isn’t registering a fastened belt.
What is restraint system in BMW? – Related Questions
How do I reset my safety restraint?
Turn Your Ignition on and Off.
First, turn the ignition switch on. Next, wait for the airbag light to turn on – it normally stays lit for seven seconds before shutting itself off. Then, immediately turn off the ignition switch, and wait three seconds. Repeat the initial steps once or twice before starting the engine.
How do I clear a service safety restraint?
Option 2: Delete service SRS code
Get an OBD II scanner with the SRS reset feature. Plug in the scanner’s cord into the OBD II port beneath the dashboard at the driver’s side. Scan for the service SRS problem code. Delete the code from the computer system.
What does it mean when it says service safety restraint system?
What Does Service Safety Restraint System Mean? The service safety restraint system light indicates that the restraint system is malfunctioning. As a result of this malfunction, some components may be triggered unintentionally or may not deploy as intended during an accident.
Why is my BMW airbag light on?
What does it mean: The airbag system, or supplemental restraint system (SRS) light illuminates when a problem is detected by your BMW’s computers within the airbag control unit. An illuminated SRS warning light means that the system has been disabled and the airbags will not deploy in the event of impact.
No, it is not illegal to drive with an airbag light on. In some cars It is even possible to deactivate passenger airbags, which will cause the airbag light to display on your dashboard.
How much does it cost to fix airbag light?
Number 1 — Reset Airbag Light
You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on.
How do I fix my airbag warning light?
The best thing to do if your airbag light has come on is to take the vehicle to a mechanic right away. A mechanic can help you to deal with the airbag light by examining the system with the help of the car diagnostic internal system.
Why will my airbag light not go off?
Battery Backup is Drained
It’s the most common reason of why your airbag light won’t turn off. It could happen when your car battery is low or has been drained for some reasons. The problem will be gone once the battery is fully recharged. However, the battery could still be on.
Can you reset airbag light without tool?
It is impossible in most car models to reset the airbag light without a scanner. This is for safety cautions because you should always repair the fault after the airbag light occurred. Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem.
On average, expect around $1,000 to $1,500 per airbag that needs to be replaced. That doesn’t take into consideration other parts that need to be changed; just the airbags themselves. Airbag module replacement will run another $600 and up.
Why is my airbag light on my dashboard?
When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision. While it’s possible that all the airbags could work as intended even with an SRS warning light, a failure in the airbags is a significant safety concern.
Will disconnecting battery reset SRS light?
You can turn the light off manually if it comes on. It is just a matter of disconnecting the battery or turning the ignition key on and off three times within a few seconds. This solution does not always work. Some car models will require you to reset the airbag light manually.
Where is the airbag sensor?
How do you check for airbag fault?
The airbag codes are double digit numbers. To read the codes, count the number of times the light flashes, wait for the pause and count the flashes again. For example, two flashes, a pause and four flashes mean that your airbag system’s problem is a code 24.
How do you reset the airbag light on a BMW?
Turn on your car and make sure that the airbag light is on.Wait for seven seconds, then turn your car back off.Repeat this process two more times. Your airbag light should turn off.