What is the bolt pattern for a Subaru Crosstrek?

Are all Subarus 5×100 bolt pattern?

All Subaru Impreza WRX through 2014, the 2004 WRX STi, and standard Impreza models use a 5×100 bolt pattern. Everything else uses a 5×114. 3 bolt pattern.

When did Subaru change to 5×114 3?

What size are Subaru wheel nuts?

ULTREX WHEEL NUTS BLACK M12X1. 25 FOR SUBARU / NISSAN.

What thread size is a Subaru Crosstrek?

12mm x 1.25 thread size, 13/16″ hex.

Are all Subaru lug nuts the same?

None of this is specific to Subaru. All cars should have the wheel lug nuts torqued. What is specific to Subaru is the 1.25 thread pitch. If the same torque is applied to a 1.25 pitch fastener and a 1.5 pitch fastener, the 1.25 will be tighter, that is, it will have higher clamping force.

What size socket do I need for my lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17mm, 19mm, 21mm, and 23mm. These four sizes will generally cover 95% of your needs so make sure that the lug wrench you buy has them.

Do I really need a torque wrench for lug nuts?

That’s why most owner’s manuals have a torque specification for lug nuts. If you plan to do any major work on your engine or on some major powertrain components, you absolutely need a torque wrench. Overtightening cylinder-head bolts, for instance, can easily cause expensive damage and catastrophic coolant loss.

What tool do mechanics use to remove lug nuts?

Impact wrenches are found in the tool chests of mechanics everywhere. They’re commonly used for loosening lug nuts from cars and trucks, but they can also be used in any high-torque situation.

Are lug nuts 6 point or 12 point?

A 12 point socket can be used to fasten the lug nuts.

Can you use a 12 point wrench on a 6 point bolt?

A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle. This geometry will also fit on a 6-point fastener. Your tool will work best when it fits precisely onto the fastener.

What is better a 6 point or 12 point socket?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

Is 12 point socket better?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

Can I use a hex socket on a 12 point?

Both 6-point and 12-point sockets can be fitted on hex nuts, the primary differences being convenience and torque. The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut.

Are triple square and 12 point sockets the same?

8mm 12-point socket fits many fasteners found on VW, Audi & Porsche cars. This special 12-point size is also called Triple-Square or “XZN”.