Your Subaru touchscreen may not be responding for several reasons. There could be a bug, an operating system problem, a short circuit, or a power supply problem. The basic things you can do are: Reset or restart the screen.
Turn your engine off, and wait 5 seconds. This will give the computer time to reset. If you’re in a Subaru with a manual transmission, shift into neutral. Turn your engine on again, but don’t start it just yet—let it idle for about 15 seconds so the car can warm up before you drive off.
How do you reset the touchscreen on a 2017 Subaru?
Why is the radio in my Subaru not working?
Potential Cause: The most likely cause for a car that runs fine, but the stereo won’t turn on at all, is a blown fuse. If the fuse connected to the car stereo has blown, the circuit will be incomplete and power simply can’t reach the head unit (the part of the stereo in the center console).
Why isn t my subaru screen working? – Related Questions
Why is my radio screen in my car not working?
Blown Fuse
The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.
Why is my radio display not working?
A damaged or defective fuse might lead your car radio display not to work. This particular fuse sits right between the display unit and the power line. If you installed a newer stereo system by replacing the stock one, there might be an issue where the aftermarket stereo won’t turn on due to a defective fuse.
What causes a radio to have no sound?
Check each set of wires and speakers to be sure no wire or lead is connected to a chassis ground. The radio will see this as a short and turn off the internal amplifier causing the on but no sound issue. Each speaker connected to the radio needs dedicated positive and negative leads from the radio to each speaker.
How do you know if the fuse is blown for the radio?
Why is my radio getting power but not turning on?
Most probably, the power wires of the stereo are in bad condition. While one power wire is always out, the other only heats up with the ignition key. But, if their functions get inverted, the stereo will stop working. If these power wires do not have any voltage, it is time to replace them.
How do I reset my radio in my car?
Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.
How do I reset my car screen?
How do you fix the touch screen in a car?
Clean your touchscreen.
Reboot the touchscreen by turning it off and back on again.
Recalibrate the screen from the settings menu.
Perform a factory reset.
What does a hard reset do to your car?
Some cars have a factory reset option that will return the settings and data to their original state. But even after a factory reset, you may still have work to do. For example, your old car may still be connected to subscription services like satellite radio, mobile wi-fi hotspots, and data services.
How do I restart my car infotainment system?
Turn on your infotainment system and check if it’s still frozen. Locate your audio system power button. Press down the power button for five seconds. A screen may appear asking if you’d like to reboot the system.
The reason you’re facing the black screen issue may not even be related to Android Auto on your phone. It could be that your car’s stereo system or head unit is malfunctioning, so you’re unable to use Android Auto. A quick fix for this issue is to restart your car’s head unit.
How do I reset my touchscreen car stereo?
First, long press the power button for a few seconds.Next, open the menu tab.From here, select “Factory Reset.” Now, wait till the factory reset is complete and the car stereo turns on again.
How much does it cost to fix infotainment?
If you’re driving a newer car with an infotainment system, expect the repairs to cost more. Replace a broken antenna: $100 to $300 or thereabouts. Replace the amplifier: $30 to $300 for the part, and $50 to $200 for labor. Replace a speaker (woofer or subwoofer): $50 to $500.
Why did my infotainment system stop working?
A malfunction in the power source of the car can also cause the infotainment system to fail. Some of the common reasons why the infotainment system won’t turn on because of the power source failure include blown car fuse, wiring issues, blown valves or lack of power to operate the system.
Can you replace infotainment system?
Conversely, shopping for and installing aftermarket infotainment systems can also be a possibility, though it will come at a cost. Most infotainment systems found in vehicles are only compatible with tech made by or specifically for the automaker. However, some are open to working with aftermarket upgrades.
How much is it to fix a radio screen in a car?
It can cost anywhere from $25 to $300 to fix your used car’s radio.